Adjustable scraper Spreader mode, Spreader accuracy of +/- 0.02mm, equipped with air-cooled water-cooled double chill down system, Spreader rate of 5-25m/min, Heating Temperature range to 200 ℃ +/- 3 ℃.
Water-Cooled cooling system, LED UV Illuminant with 395 nm wavelength and 700 W Power, Light intensity 0-100% adjustable, conveying speed 0-6 m/min adjustable, suitable for rapid curing of various UV materials.
Using 395nm wavelength LED Illuminant, Optical Power up to 12W/cm ², equipped with Water-Cooled system to ensure stable operation, adjustable irradiation distance of 10-50mm, support 0-100% stepless dimming, suitable for a variety of material curing needs.
The Water-Cooled cooling system is adopted to ensure stable operation. The 395nm wavelength LED Illuminant provides uniform illumination. The light Power reaches 12W/cm ² and the illumination distance is 30-50mm. It has over-temperature protection and Power 0-100% adjustment function.
Temperature range -40 ° C to + 150 ° C, Impact conversion time ≤ 10 seconds, supports 120 sets of program capacity, uses water-cooled refrigeration system and PID control to ensure Temperature Fluctuation +/- 0.5 ° C and Uniformity +/- 2.0 ° C.
Using two-box mobile Impact structure, Thermal Shock mechanism moves within 10 seconds, temperature recovery time ≤ 5 minutes, equipped with rigid polyurethane foam insulation material, effective energy saving and waterproof and moisture proof.
Adopt two-box mobile structure, air pressure drive test object Impact, Thermal Shock mechanism moving time within 10 seconds, temperature recovery time within 5 minutes, in line with MIL and other international test standards.
The two-box mobile structure is adopted, the Thermal Shock mechanism moves within 10 seconds, and the temperature recovery time is within 5 minutes. It is equipped with HFC environmentally friendly refrigerant and binary ultra-low temperature freezing system, which has high cooling speed and efficiency. It supports paperless recording and real-time Linear dispersion display function.
Temperature range -40 ℃~ + 150 ℃, conversion time ≤ 10 seconds, using water-cooled refrigeration system and PID control, support 120 sets of program capacity, with USB data storage and multiple security protection, suitable for harsh environment testing.
The hydraulic pump provides 150bar pressure to tighten the sample; the double-ended die sleeve can be operated independently of any specification; the hot and cold separation design ensures safety and stability; the water chilling down system accelerates the sample preparation speed.
The three-box structure design is adopted, the test sample is still in the test area, the temperature recovery time is ≤ 5min, and the conversion time is ≤ 10s. It has three test functions of high temperature, low temperature and Thermal Shock, meeting a variety of standard requirements.
Adopt triple-channel thermal insulation structure to realize cold and hot air circuit switching, temperature recovery time within 5 minutes, Impact time can reach 9999 minutes. With 96 test specification settings and P.I.D automatic calculation control to ensure Test accuracy.
The hydraulic pump provides 16Mpa pressure to ensure the sample is tight, and the water chilling down system is equipped to speed up the sample preparation. The unique swirl/spin lock design simplifies the operation, and the program control realizes the heating to 180 ° C and the adjustable holding time, and the performance is stable and reliable.
Using three-box equipment structure, the temperature conversion time does not exceed 10 seconds, the temperature control accuracy reaches +/- 0.5 ℃, and the air circuit switching method realizes fast Thermal Shock, which is suitable for material physical and chemical change testing.
Adopt triple-channel thermal insulation structure to realize cold and hot air circuit switching, temperature recovery time within 5 minutes, Impact time up to 9999 minutes, with 96 test specifications independently set and automatic defrosting function.
