The stator diaMeter is 8mm, the maximum processing viscosity is 500CP, and the maximum linear speed is 8 m2/s. It is suitable for 10~ 60ml Sample Handling and is suitable for HR-6B/10B type homogenizer.
The stator diaMeter is 10mm, the maximum processing viscosity is 2000CP, and the maximum linear speed is 10 m2/s. It is suitable for HR-6B/10B type homogenizer, and the standard Processing capacity is 30-150ml.
Adopting rotary oscillation design, Frequency 3000rpm, pendulum amplitude 5mm, suitable for small containers such as testtube and Colorimetric tube, it can efficiently handle the experimental requirements of large chemical reactions and few solutions.
Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
The eccentric spherical shaft design ensures uniform mixing, and the fixed speed of 2800RPM realizes fast vortex mixing. The TPU material countertop is wear-resistant and corrosion-resistant, small in size and low in noise.
Adopting stepless speed regulation technology with a maximum speed of 2800RPM, equipped with eccentric spherical shaft and wear-resistant TPU table, supporting two continuous operating Modes of point movement, the body is resistant to acid and alkali collision and has low operating noise.
32 5ml centrifuge tubes can be installed vertically on both sides, using a vertical installation design, suitable for HT-X100 swirl/spin Mixer, improving Sample Handling efficiency.
Maximum load 0.5KN, designed for small force test, compact structure, easy operation, ensure test Stability and Repeatability.
Fixed speed 2800RPM, eccentric spherical shaft design to ensure uniform mixing; TPU material work surface wear-resistant and corrosion-resistant, suitable for a variety of testtube specifications; compact size and low power consumption, suitable for long-term high-speed work.
Double-sided horizontal mounting design can accommodate 40 centrifuge tubes simultaneously, compatible with 1.5ml and 2.0ml specifications, suitable for swirl/spin Mixer for efficient Sample Handling.
The pat speed is 3~ 12 times/second, the pat spacing is 0~ 40mm, the homogeneity is soft and non-destructive, and there is no need to sterilize, which effectively prevents cross-contamination and protects the operator's safety.
Using swirl/spin design, light weight and easy to move, can effectively improve the Measurement accuracy and prevent the instrument from falling, suitable for small workpiece measurement scenarios.
Programmable setting of 3 to 12 times/second tap speed and 1 second to 100 minutes timing, adjustable tap spacing from 0 to 50mm, equipped with 4.3-inch touch screen and voice alarm function, effectively preventing cross-contamination.
Impact energy 2.7mJ, Impact device mass 75g, small damage to the measured surface, does not damage the hardened layer, suitable for measurement of small and thin parts, the minimum thickness of the specimen is 1mm, and the minimum depth of the hardened layer is 0.2mm.
The microcomputer control supports 8-stage programming, the pat speed is 3-12 times per second, and the time can be adjusted to 99 hours, 59 minutes and 59 seconds. The sample is handled without contact to avoid cross-contamination and no need to clean the utensils.
