Controlled by single chip microcomputer, temperature accuracy +/- 0.03 ℃, kinematic viscosity measurement range 0.5~ 20000mm ²/s, automatic tracking of heating Linear dispersion and precise control of water Bath and oil Bath temperature.
Using 10L Glass Bathtub, small size and less medium consumption, temperature control accuracy of +/- 0.05 ℃, automatic accurate timing and viscosity calculation, support 4 holes at the same time experiment, easy and reliable operation.
Using positive pressure test principle, Measurement range 0~ 1.6MPa, fully automatic operation, support three test modes, built-in calibrating program, suitable for quantitative measurement of various sealing performance indicators.
The fully automatic electronically controlled hydraulic pump provides smooth and continuous pulling force with +/- 1% accuracy, built-in rechargeable battery supports 200 tests, and IP65 Protection Rating ensures durability.
Equipped with 5-inch Touchscreen, easy to operate, support 1~ 100000mPa · s wide range measurement, with automatic viscosity conversion function, data repRoducibility up to +/- 0.2% F. S, built-in alarm prompt and linear correction.
Easy to operate with 5-inch Touchscreen, equipped with anti-static shell and PC lifting Rod, Measurement range 1~ 2000000mPa · s, support power and kinematic viscosity automatic conversion, repRoducibility up to +/- 0.2% F.S.
Manufactured according to ASTM D 2162, it offers two calibrated viscosity values of 1799mPa · s (20 ° C) and 1231mPa · s (25 ° C), is fully traceable to national standards and meets international certification requirements.
Automatic lifting and stepless speed regulation function, viscosity range of 50~ 1000000mPa · s, built-in temperature program temperature control accuracy +/- 0.1 ℃, fully automatic gelatinization Linear dispersion analysis.
Ubbelohde DIN standard design, viscosity measurement range of 100-500cSt, based on the principle of capillary tubing flow time proportional to viscosity, to ensure accurate determination of liquid kinematic viscosity.
Pneumatic fixture to achieve automatic clamping, no manual operation; Measurement range covers 10~ 16000mN, support a variety of sheet material Tear strength detection, equipped with 3.2 inch LCD display and thermal printer.
The instrument adopts Precision Platinum Resistance Sensor with temperature control accuracy of +/- 0.1 ℃ and kinematic viscosity measurement range of 0~ 10000mm ²/S, which is suitable for viscosity analysis of various liquids under thermostatic conditions.
Applicable to the flow time of not less than 20 seconds viscosity measurement, using aluminum material, capacity 50ml, flow hole diaMeter 5.6mm, can be converted into kinematic viscosity.
Using Cannon-Fenske opaque design, suitable for opaque liquid measurement, viscosity measurement range of 240~ 1200cSt, High Accuracy viscosity detection based on capillary tubing outflow time method.
Ubbelohde ASTM standard design, viscosity measurement range of 20-100cSt, based on the principle of capillary tubing can accurately determine the kinematic viscosity of liquids, suitable for a variety of fluid analysis.
Ubbelohde DIN standard design, viscosity measurement range of 0.35~ 1cSt, based on the principle of capillary tubing flow time proportional to viscosity, to ensure High Accuracy and Repeatability.
