Maximum range 500g, accuracy 20mg, metal beam thickened design, scale engraving is clear and not easy to abrasion, and the bottom is equipped with horizontal adjustment screws to ensure stability.
Adopting quadrilateral pyramid mesh structure, surface chrome plating treatment enhances Abrasion Resistance and anti-corrosion performance, print width 70mm, through electronic engraving technology to ensure the accuracy of the mesh, long service life.
The stainless steel frame is suitable for wet and dry screening, laser engraving ensures clear traceability, and the aperture of 100μm meets the needs of fine grading.
Featuring a stainless steel frame suitable for dry, wet, and manual sieving, with a pore size of 250μm, laser engraving provides clear labeling to ensure full traceability.
Using electronic engraving technology to form a quadrilateral pyramid-shaped net hole structure, the number of lines 180LPI is inversely proportional to the wet film thickness, the width of the print surface is 70mm, and the surface chrome plating enhances the wear resistance and anti-corrosion performance.
Electronic engraving technology is used to make a four-prism net hole structure, with a line number of 200LPI, a print width of 70mm, and chrome plating on the surface to enhance corrosion resistance and ensure uniform and stable transmission of inks.
Adopt horizontal three-roller extrusion grinding, roller clearance hand adjustment, maximum processing viscosity 3000000cps, roller can be cooled down water temperature control, fineness control precision, suitable for a variety of viscosity materials.
Complete 64 Sample Handling in 1 minute, use vertical oscillation to ensure Stability, noise is lower than 55dB, support dry grinding, wet grinding and low temperature grinding, suitable for a variety of specifications grinding tube.
Rotation speed 86rpm, disc diaMeter 240mm, weight of about 7.32kg four pieces of adjustable pressure, double transmission to ensure that the number of revolutions is accurate, concave socket design for easy replacement of grinding, strong anti-interference and foot shock absorption anti-skid.
Complete 48 Sample Handling within 1 minute, adopt fully enclosed design to avoid cross-contamination, support 0-70Hz homogenization speed and low temperature grinding mode, and the noise is lower than 55dB to ensure a quiet experimental environment.
The surface of the three rollers is squeezed and rubbed at different speeds to achieve grinding. The roller is made of cold hard alloy steel, with a surface Hardness of HS70 ° or more, a fineness of grinding up to 15μm, and a capacity of 350Kg/h.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
96 samples are ground in 1 minute, the noise is lower than 55dB by vertical oscillation, the sample tube is fully enclosed to avoid cross-contamination, and the adapter can cool down the liquidnitrogen to achieve a low temperature grinding environment.
Three rollers are used for mutual extrusion and friction at different speeds to achieve grinding. Hardness of the roller surface is above HS70 °, and fineness of grinding can reach 15 μm, which is suitable for grinding dispersion of high viscosity materials.
Rotation speed up to 3000rpm, fineness of grinding generally up to 10um or less, liquid-liquid dispersion ground up to sub-micron or even nano level; double-decked chilled down jacket design, conventional temperature rise less than 10º, to ensure pRoduct Stability.
