Three-axis linkage automatic precision control, intelligent cutting can change the amount of feed according to the hardness of materials, the maximum cutting section is 100 × 100mm, equipped with mobile magnetic filtrate circulating water Tank and fully enclosed safety structure.
Adopt three-axis linkage system, spindle Rotation speed 24000rpm, accuracy resolution 0.003mm, support a variety of spline and notch processing, with material Water-Cooled and processing compensation functions, one processing can complete a variety of splines.
With three-axis linkage automatic precision control, the maximum cutting section of 100 × 100mm, intelligent cutting can change the amount of feed according to the hardness of materials, fully enclosed structure to ensure safe operation, mobile magnetic filtrate circulating water Tank to improve the surface mass of the sample.
Using three-axis automatic precision control, the maximum cutting section of 200 * 150mm, with intelligent cutting function can change the amount of feed according to the hardness of materials, fully enclosed structure to ensure safe operation, mobile magnetic filtrate circulating water Tank to improve the cutting mass.
A mixed processing of 50 samples, Speed range 2500rpm, built-in point, linkage, timing three operation modes, optional a variety of foam tuberack to meet the needs of different specifications of testtube.
Using ABB variable frequency motor to provide 7.5kW power, the maximum cutting section of 300 * 150mm, support intelligent cutting according to the hardness of materials automatically adjust the amount of feed, equipped with mobile magnetic filtrate circulating water Tank to ensure that the surface of the sample without burns.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
Adopt three-axis linkage system, the maximum machining error is only 0.05mm, support a variety of sample shape processing, such as bar, dumbbell and irregular graphics, spindle Rotation speed 24000rpm.
Using three-axis linkage automatic control, the maximum cutting section of 120 × 120mm, intelligent cutting can be changed according to the hardness of materials into the knife, equipped with mobile magnetic filtrate circulating water Tank to ensure that the sample surface without burns.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
Speed range is 300-23000 rpm, and the internal suction homogeneous structure can effectively homogenize, emulsify and extract. Stirrer can be used at low speed.
High Accuracy Sensor, Indication Error less than +/- 0.5%, Peak Hold, Automatic Unit Conversion and Data storage, Linear dispersion test and machine linkage control.
Equipped with a 200mm diaMeter pick-up cylinder and an 8-liter capacity, the manual Stirrer works in tandem with an 80-mesh forming filter for uniform Pulp distribution and efficient dehydrating.
Using electronic constant force speed control circuit, digital direct display Rotation speed, Power 500W, Speed range 100-2000rpm, low reliable operation noise, can calculate the relationship between stirring line speed and chemical reaction rate.
