Measurement accuracy XY +/- 0.5μm, Z +/- 1μm. Support multi-depth fusion and 2D to 3D imagery, can automatically collect images in the range of 10μm~ 100μm, and the repeability Measurement accuracy error is controlled within 5%.
The swirl/spin design is firm and abrasion-free, with a three-dimensional roll tilt angle of 10 °, a speed range of 10-70rpm, and a maximum load of 5kg. It can be used in low temperature and Thermal Chambers.
With red and blue laser dual mode fast switching, accuracy up to 0.03mm, scanning rate of 480,000 times/second, support automatic positioning and dynamic measurement, external environment influence is small, can work in direct sunlight.
Continuous zoom range 7X~ 63X, working distance up to 110mm, equipped with Process Color LED fluorescence excitation assembly and hinged trinocular observation head, support a variety of fluorescence Observation modes.
Adopting crane bearing swirl/spin design, no abrasion and suitable for long-term operation; speed range 10-80rpm, maximum load 5kg; molded shell is acid and alkali resistant and easy to clean, can be used in the refrigerator.
Acceleration Meter to achieve three-dimensional vibration measurement, Frequency range 10Hz-10KHz, accuracy +/- 5% + 2 words, bearing condition measurement and automatic shutdown function, weight only 130 grams.
Simultaneous measurement of three-axis or single-axis vibration paraMeters, Frequency range up to 10Hz-10KHz, Support for Displacement, Speed and Acceleration Measurement modes, with AC signal output for auscultation recording.
With red and blue dual laser scanning mode fast switching, the highest accuracy of 0.03mm, scanning rate of 320000 times/second, support automatic positioning and dynamic measurement, environmental adaptability.
Equipped with a long working distance flat-field color difference elimination objective lens and four sets of fluorescence filters, it supports phase contrast observation and fluorescence switching, and the fretting grid value is up to 2 μm, which is suitable for clear imagery of living cells and liquid samples.
Infinity Optical inspection system, support for Brightfield, Fluorescence, Phase Contrast, Polarization Observation mode; equipped with six-hole converter with DIC slot and 100W mercury lamp light source, providing high-resolution images; autofocus system to maintain sample focal plane stability.
Can simultaneously display three-direction vibration paraMeters, support Acceleration, Speed, Displacement measurement, Acceleration Frequency range of 10Hz~ 10kHz, with AC signal output and a variety of Interface, easy to field detection and data recording.
Optical inspection fluorescence technology for measurement of dissolved oxygen, no polarization time, fast Response and not affected by Flow velocity; Built-in temperature sensor, Measurement range 0.00-50 mg/L, accuracy up to 1.5% +/- 0.01mg/L; Protection Rating IP68, suitable for harsh environments.
With three light source system, can simulate D65, D50 and TL84 environment, color rendering index up to 98, all metal material to ensure durability, table size 1350 * 900mm, slope design to optimize visual observation.
Using fluorescence measurement technology without replacing the diaphragm and electrolysis solution, Measurement range 0.000~ 20.00mg/L accuracy +/- 0.20mg/L, support 3000 sets of Data storage and interval timing measurement, IP57 Protection Rating.
Equipped with 254nm and 365nm dual-wavelength ultraviolet light sources, it supports thin-layer analysis and paper-layer analysis, can identify fluorescent substances, and is equipped with a 200 * 50mm filter.
