Stainless steel combustion box flue gas and corrosion resistance, Control system Degree of automation, flame time 0-99 minutes and 99 seconds adjustable, flame height 20-100mm adjustable, automatic recording of the test process.
Using Bunsen burner combustion device, nozzle inner diaMeter 9.5mm, automatic ignition control, flame application time accuracy of +/- 0.1 seconds, can simulate open flame environment to evaluate battery flame resistance and leakage risk.
Gas detection alarm device and automatic exhaust system, flame time 0-999.9s adjustable, flame height 20-175mm adjustable, support a variety of combustion angle adjustment to ensure safe and accurate testing.
1KW standard blowtorch, flame height 170-190mm, support 0.1-999 seconds holding time setting, with automatic timing and high voltage ignition function, suitable for flame retardant performance testing of various cable materials.
Equipped with combustible gas concentration detection and alarm system, automatically cut off the gas and start the exhaust; Test space ≥ 0.5m ³, flame height 20-175mm adjustable; support a variety of combustion angle adjustment to ensure test accuracy.
Test space ≥ 0.5m ³, flame application time 0~ 99min99s can be set, combustion angle 20 °, 45 °, 90 ° adjustable, flame height 20mm to 175mm adjustable, motor drive automatic alignment spline.
Equipment supports vertical and horizontal combustion test, can set combustion and extinguishing time and repeability times, automatic stop test, Internal dimensions 305 * 355 * 610mm, suitable for a variety of organic materials.
Using catalytic combustion detection principle, the range covers 0-100% LEL, Response Time ≤ 30 seconds, with flameproof structure and a variety of signal output, support remote monitoring and linkage control.
Made of tungsten, with a total length of 17-18mm and a needle diaMeter of 1mm, it has excellent wear resistance performance and accurate scratch testing ability.
Flow rate can be controlled independently for each purge needle, and the position of the air needle can be adjusted flexibly. Temperature control accuracy of +/- 0.5 ℃ (40-100 ℃), Heating time does not exceed 30 minutes, support 0-15L/min Gas flow rate adjustment.
Using PLC Control system and Touchscreen operation, equipped with K-type Thermocouple and intelligent PID temperature control Meter, Heating time 54s +/- 2s from 100 ℃ to 700 ℃, Interior volume ≥ 4.0m ³, to ensure accurate and efficient testing.
The equipment adopts stainless steel structure to resist corrosion, equipped with automatic ignition and Timing function, combustion time 0~ 99.99 seconds, gas lamp Nozzle inner diaMeter 9.5mm, to ensure accurate and reliable testing.
Measurement principle of needle conductivity, Measurement range 0-80%, support a variety of material code selection, with 99 data storage and automatic statistics function, data communication can be realized through RS232 interface.
Catalytic combustion Sensor, adjustable detection accuracy, temperature compensation and automatic zero correction function, support 4~ 20mA output and RS485 digital output, suitable for hazardous areas.
Each purge needle can independently control and adjust the Flow rate, the temperature control accuracy is +/- 0.5 ℃ @40~ 100 ℃, the position of the air needle is flexible and adjustable, and supports efficient Sampling Handling.
