The injection limited bottom surface method is used to directly measure the angle of repose, the funnel taper is 60 ° +/- 0.5 °, and the outflow diaMeter is 5mm, which is suitable for powder flowability analysis of different particle sizes and shapes.
Carr Angle of Repose was determined by injection limited bottom surface method, funnel taper 60 ° +/- 0.5 °, outlet diaMeter 5mm can be customized 10mm, easy to operate, durable, can accurately reflect the powder flowability.
Using injection defined bottom surface method for measurement, the funnel outlet has a diaMeter of Φ 5mm and a taper of 60 ° +/- 0.5 °, which can accurately measure the acute angle between the inclined surface of dust accumulation and the horizontal one.
Using fixed funnel method to measure powder flowability, equipped with 10mm inner through Glass funnel and 0-100mm scale struts, can accurately measure cone height, meet the requirements of Pharmacopoeia and ISO standards.
It can simultaneously measure more than 10 physical paraMeters such as angle of repose and tap density. The vibration frequency is 300 rpm, and the repeatability error is ≤ 3%. It supports a variety of national standard test methods to meet the needs of comprehensive characteristic analysis of powder.
Can test flowability, Angle of Peace and Loose Bulk Density, equipped with 30ml stainless steel measuringflask and double powder plate, funnel diaMeter can be selected 5mm or 2.5mm, for precise control of powder mass.
With three projection angle measurement function, Measurement range 0~ 2000GU, Repeatability +/- 0.5GU, can simultaneously measure Glossiness and fog shadow value, support 56 groups of Data storage.
With 20 °, 60 °, 75 ° multi-angle measurement function, Measurement range 0~ 2038GU, Repeatability 0.5GU, using photoelectric detection technology, support automatic printing and statistical calculation, suitable for accurate detection of different Glossiness surfaces.
Three-angle simultaneous measurement 20 °/60 °/85 °, Measurement range 0.1-2000 GU, Repeatability +/- 0.5GU, built-in lithium battery, can store 56 sets of data, support USB and Bluetooth output.
CCD camera system to achieve 1280 × 1024 resolution image analysis, support 0~ 180 ° contact angle and 0~ 400mN/m surface tension measurement, with dynamic contact angle analysis and solid surface energy estimation function.
Baseline and droplet contours are automatically recognized by machine vision, and contact angles are calculated based on Laplace equation quadratic Linear dispersion fitting. Measurement range is 0-180 °, accuracy is 0.1 °, and dynamic contact angle measurement and surface energy calculation are supported.
Support 15 °, 45 °, 110 ° three angle measurement Color data, using LED Illuminant life up to 10 years, small opening convenient measurement surface, built-in lithium battery can be measured anytime and anywhere, chromatic value Repeatability dE ≤ 0.05.
The instrument's observation angle is continuously adjustable from 0.2 ° to 2.0 °, the incident angle covers +/- 0 ° to +/- 20 °, and the Measurement range is 0~ 3000 mcd • lx-1. It uses silicon diode Detectors and standard A Illuminants to ensure measurement accuracy.
With three-angle measurement capability, Measurement range 0-2000Gu, Repeatability +/- 0.2GU, all-metal Probe structure and IP65 Protection Rating, support Automatic calibration and a variety of international standards.
With 15 °, 45 °, 110 ° three-angle measurement capabilities, can detect particle grade and aluminum foil characteristics, with LED Illuminant life of up to 10 years, support Bluetooth connected mobile devices, measurement time is less than 6 seconds.
