Using 160 line metal anilox roller and rubber roller combination, print width 70mm, suitable for inks proofing, wet film thickness and the number of lines inversely proportional, proofing authenticity and easy to operate.
150 line metal anilox roller and 70mm print width, quadrilateral pyramid mesh design to ensure uniform Spreader, proofing intuitive real, suitable for a variety of liquid Coating Spreader.
Using 300-line quadrilateral pyramid-shaped mesh hole stainless steel anilox roller, the print width is 70mm, the wet film thickness is inversely proportional to the number of lines, and accurate Spreader is realized through handle operation.
Using 180LPI metal anilox roller with 70mm print width, four pyramidal net hole structure to ensure the ink transfer evenly, the handle design in line with ergonomic operation labor-saving.
Using 220LPI line number stainless steel anilox roller, printing surface width 70mm, mesh shape is quadrilateral pyramid, wet film thickness is inversely proportional to the number of lines, suitable for proofing of different inks.
Using 100-line metal anilox roller, printing surface width 70mm, the mesh is a quadrilateral pyramid structure, liquid Coating can be uniformly Spreader on various substrates to obtain samples with good repRoducibility.
Adopt servo electric printing pressure system, printing pressure 0-4mm automatic adjustment, printing speed 0-100 Meters can be set, support low accuracy overprint, simulate Gravure Printing drawdown blade Installation method, easy to detect inks.
Four-speed proofing speed is optional, up to 45m/min, using flat engraving plate for direct printing, supporting 95 × 149mm concave sample range, suitable for fast proofing of flexible substrates.
It adopts 120-wire metal anilox roller with quadrilateral pyramid net hole structure, the print width is 70mm, and the precision Spreader is implemented through electronic engraving technology. The operation is simple and the proofing repRoducibility is good.
Pressure adjustable range -1 to + 1mm, proofing speed support 400-700rpm three-speed frequency conversion speed regulation, uniform ink time 15-800 seconds adjustable, fixed structure to ensure proofing Stability.
The printing speed is 0~ 260m/min, the accuracy is less than 0.5, which supports data management and characteristic detection, and can reduce the number of proofing and material waste.
Using metal plating anilox roller, the number of anilox lines reaches 250 lines/inch, which can precisely control the fineness of the film, and the movable handle design is easy to operate. It is suitable for Spreader testing of various liquid materials.
Using ceramic roller synchronous rotation technology, the thickness of the proofing material supports 0.01~ 2mm, the uniform ink speed is 10-80m/min, the pressure can be adjusted by +/- 2mm, and the structure is flexible and easy to disassemble.
The thickness of INKS film is precisely controlled by the 200-wire tetragonal pyramid-shaped mesh stainless steel anilox roller, which is easy to clean manually and can quickly prepare samples with highly consistent flexographic printing effects.
Using nitrile rubber material, length 100mm diaMeter 20mm, with excellent oil resistance and aging performance, suitable for inks proofing operation.
