Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Impact height 40cm, drop weight mass 500g, the degree of damage to the paint film is assessed by steel ball Impact, and the digital grade shows the anti-Impact ability, which is suitable for standard testing.
Impact block weight 500 +/- 5g, ball diaMeter φ 14 Hardness HRc60-66, can accurately assess the damage grade of paint film.
Impact height up to 120 cm, weight weight mass 1000g, no secondary rebound after impact, to ensure accurate and reliable test results, suitable for film impact performance evaluation.
Impact performance of paint film can be accurately determined by using 1000g standard weight and 100cm adjustable impact height, 8mm diaMeter of punch, which meets the standard test requirements and is easy and reliable to operate.
Impact performance of the reflective film can be accurately measured by using the principle of free fall of steel ball, steel ball mass 450 +/- 3g, drop 250mm, reasonable structure and simple operation, safe and reliable measurement.
Impact height 0-50cm can be accurately adjusted, drop weight mass 1000g with the Φ 8mm punch, can accurately determine the film anti-Impact performance, easy to operate and Repeatability.
Impact height 0-100cm adjustable, equipped with 1000g drop weight and Φ 8mm punch, Impact depth 2mm, can accurately determine the material anti-Impact performance.
Impact height 0-50cm adjustable, equipped with 1000g drop weight and Φ 8mm punch, Impact depth 2mm, can accurately determine the material resistance to Impact performance.
Impact energy 11mJ, ball head Hardness up to 1600HV, can measure the minimum thickness of 5mm specimen, suitable for asperity 1.6μm surface, Che diaMeter minimum 0.35mm, to meet the needs of precision hardness testing.
Using 1kg weight free fall impact, impact height adjustable range 0-50cm, equipped with φ 8mm punch and φ 15mm die base, can carry out positive and negative impact test.
Impact method using drop ball, test height range of 50-1000mm, equipped with four radius Impact head and 300-1000g weight, can accurately evaluate the material anti-Impact performance and fracture.
Impact height 0~ 50cm adjustable, drop weight mass 1000g, the structure is simple and easy to operate, punch diaMeter 8mm and die base aperture 15mm cooperate to prevent the edge of the test plate shear.
Impact height of 120 cm, Impact depth of 2.5 mm, using a fixed mass weight to avoid secondary rebound, to ensure accurate and reliable test results.
Impact energy 11mJ, Ball Hardness 1600HV, contact surface slender lengthened design, suitable for measurement of grooves or concave surfaces, the minimum thickness of the specimen is 5mm, and the minimum depth of the hardened layer is 0.8mm.
