The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
Using electromagnetic motor and diaphragm sealing Chamber, Vacuum Level up to 0.08Mpa, pumping rate 60L/min, non-oil pump design pollution-free, full Teflon material resistant to strong acid and alkali corrosion, free of daily maintenance.
Two-stage pump structure is equipped with PTFE material pump head, strong corrosion resistance, maximum Flow rate 125L/min, Ultimate vacuum degree 15-20mbar, no pollution and maintenance, low noise and low temperature rise.
Using electromagnetic motor and diaphragm sealing Chamber, maximum Vacuum Level 0.08Mpa, full Teflon material resistant to strong chemical corrosion, free of daily maintenance and long service life.
Using PTFE pump head material and coating diaphragm, suitable for strong corrosive gases, pumping speed 20L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, good air tightness and noise less than 58dB.
Using electromagnetic motor and diaphragm sealing Chamber, the maximum Vacuum Level is 0.08Mpa, full Teflon material is resistant to strong chemical corrosion, free of daily maintenance and long service life, suitable for positive and negative pressure dual-use scenarios.
Using oil-free vacuum pump to achieve pollution-free work, with three-speed Vacuum Level conversion and 0.01s high resolution, intelligent pneumatic pressure to ensure Test accuracy and efficiency.
Using PTFE pump head and diaphragm material, resistant to strong corrosive gases. Pumping speed 60L/min, Ultimate vacuum degree 3-8mbar, with pressure relief and cleaning functions, good air tightness, operating noise less than 58dB.
Circular rotation synergistic vortex flow, completely discharged bubbles; American technology ST vacuum pump noise low Vacuum Level high; 8 groups of 5-stage formula can be memorized; Touchscreen easy to operate; Safety protection complete.
Using circulating water as the working fluid, the maximum Vacuum Level is -0.098Mpa, the pumping rate is 80L/min, the special fluid muffler reduces the noise, the double tap design can be used alone or in combination, and the ABS engineering plastic shell is resistant to corrosion.
Adopt oil pump forced oil inlet device, can operate continuously under 1.33 × 10 ³ Pa intake pressure, gas distribution ballast to prevent pump oil mixing, pumping speed 2L/S, Ultimate vacuum degree up to 0.006mbar, support a variety of interface conversion.
Using PTFE pump head material and PTFE coating diaphragm, suitable for strong corrosive gases and steam, pumping speed up to 40L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, noise is less than 58dB.
1Mm Vacuum aperture diameter and 18mm hole spacing design, equipped with 176 adsorption holes to ensure that the substrate is flat and fixed, with 150W vacuum pump to achieve stable adsorption effect.
The rectangular vacuum Chamber improves space utilization, Vacuum Level up to 133Pa, is equipped with double-decked tempered Glass doors for easy observation, supports program control of heating and vacuum holding time, and improves processing conformity.
