Equipped with double spray guns to achieve uniform lame plating, the lifting range of the spray gun is adjustable from 10-500mm, the integrated air filtrate adjustment system supports magnetic or vacuum panel fixing, and improves the coating test Repeatability.
Fully pneumatic design ensures stable operation, adjustable spray gun settings for precise atomization and film thickness control, and magnetic panel supports multiple substrate tests.
Support 4 specimens synchronous testing, folding angle 0-45 degrees adjustable, folding speed 80 +/- 5cpm, using LCD counter to achieve accurate counting, to meet the requirements of material refractive performance evaluation.
With -50~ 700 ℃ wide range and +/- 2% accuracy, laser positioning ensures accurate measurement of the target, 12:1 object distance ratio supports long-distance detection, 500ms fast Response real-time data.
With -32~ 380 ℃ wide range and +/- 2% accuracy, 12:1 object distance ratio for non-contact measurement, 500ms Fast Response and equipped with laser positioning function.
Fluorine-free environmental protection design, temperature control accuracy +/- 0.5 ℃, minimum temperature -20 ℃, equipped with stainless steel heat exchanger and magnetic front gear plate, compact structure can chill down multiple devices at the same time.
Color temperature adjustment range 2300K-8000K, illumination adjustment range 0-4000Lux, built-in mobile slide can move the camera front and rear, light source light board can swirl/spin to adjust the angle, provide a uniform lighting environment.
The double-door widening design avoids colliding with the front window, the operation room forms an anaerobic time of less than 1 hour, the temperature fluctuates by +/- 0.3 ° C, and is equipped with an ultraviolet sterilization lamp and a deoxygenation catalyst.
Glass transmittance measurement is facilitated by split dual-machine design, integrated UV-IR-VIS 3-in-1 test function, equipped with laser alignment to ensure measurement accuracy +/- 2%, and supports built-in lithium battery power supply.
The main and auxiliary machine split design is convenient for on-site measurement, three independent test units are averaged to improve accuracy, built-in lithium battery power supply is convenient to carry, laser alignment ensures accurate measurement, Measurement accuracy +/- 2%.
It can filtrate water vapor impurities and protect Vacuumpump to prolong its life. It is made of non-wOven fabric and has a joint diaMeter of KF25. It is suitable for small rotary vane Vacuumpump with pumping speed ≤ 6L/s.
Vertical airflow design with 99.995% efficient filtrate, equipped with intelligent LCD display real-time monitoring of wind speed and temperature, front window 10 ° tilt operation surface in line with ergonomics, noise ≤ 62dB quiet operation.
The design of top outlet air and front inlet air is used to improve the heat transfer effect, and the double pump and double temperature control are equipped to realize the independent cooling down of the main and auxiliary waterways, and support the pump pressure of 0.8 bar and the adjustment of the wide temperature range of 5~ 35 ℃.
Using white fiber filter element with black sieve structure, KF25 interface is suitable for pumping speed ≤ 6L/s Vacuumpump, which can effectively intercept oil and gas impurities, filter element can be cleaned and replaced, and maintenance is convenient.
Made of stainless steel, range 0-100μm, Graduation 5μm, scraper front can be used for drawdown blade straightness daily inspection, surface roughness Ra1.6.
