The equipment adopts the mechanical action of flying knife roller and bottom knife, which can handle 200-700g absolute dry slurry, the speed of flying knife roller is 500 +/- 10rpm, and supports heavy thallium pressure adjustment and automatic beating time control, so as to realize fiber refinement and beating degree. Precise regulation.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1s, using national standard design, can accurately detect Pulp suspension filtration rate.
Using electronic technology and LCD screen, impeller rotation frequency 49 +/- 1.5S-1, motor power 370W, wet dissociation pulp to maintain the original fiber structure, easy to operate.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1 seconds, cone rising speed 100 +/- 10mm/s, used to detect Pulp suspension filtration rate, in line with ISO 5267-1 international standards.
Using arc surface drying plate design, the maximum temperature can reach 180 ℃, Heating power 2500W, the steam is quickly discharged during the drying process, easy to operate and maintenance-free.
Measurement range 0~ 100 ° SR, cone rising speed 100 +/- 10mm/s, suitable for all kinds of Pulp suspensions, can use raw materials economically and end the Refining process in time, simple and reliable operation.
Adopt double disc co-directional sticky Refining mode, flying knife Rotation speed 1400r/m, disc clearance 0-25mm adjustable, equipped with 3.2-inch LCD display real-time display Refining Power and power consumption paraMeters to meet the needs of different concentration Pulp experiments.
Adopting 1000-5000rpm variable frequency speed regulation technology, equipped with 370W motor and 3L capacity container, it can achieve efficient dissociation without destroying the fiber structure, meeting the processing requirements of different Pulp samples.
It can measure the range of 0-1000CSF, with an accuracy of 10CSF, using 304 stainless steel material and silicone sealing ring structure, with self-Adjustment, suitable for various Pulp water filtration change detection.
Made of stainless steel, with a pulp diaMeter of 50mm and a Rod length of 500mm, it is suitable for medium and low viscosity mixing. Medium and high speed operation provides efficient mixing effect.
The equipment adopts international standards, the papermaking diaMeter is 300mm, the capacity is 8 liters, and it is equipped with manual pulp plate and optional vacuum papermaking function.
Adopting frequency conversion stirring technology, the impeller Rotation speed can be adjusted from 1000-3600rpm, and supports two test modes of counting and not counting to ensure that the fiber retains its original structural properties during the wet dissociation process.
Using 48.3 +/- 1.65S impeller Rotation Frequency and 2900 +/- 100rpm Rotation speed, the fibers were separated gently through four inner helical baffles, keeping the original structural characteristics of the fibers unchanged.
The slow mixing design operates in the laminar flow area, the liquid forms an axial circulation along the helical surface, the diaMeter of the pulp sheet is 60mm, and the Rod length is 350mm, which is suitable for the treatment of medium and high viscosity media.
Equipped with a 200mm diaMeter pick-up cylinder and an 8-liter capacity, the manual Stirrer works in tandem with an 80-mesh forming filter for uniform Pulp distribution and efficient dehydrating.
