Using high-speed ADC data collection, resolution up to 1μm, can simultaneously measure the thickness of multi-layer coatings or coatings plus substrates, with gain automatic switching and estimated thickness setting function, Measurement range 13~ 1000μm (epoxy resin coating).
Equipped with three high voltage gas driven atomization nozzles and anti-drip baffles, support inert gas protection lame plating at 5000Pa basic Vacuum Level, with 0.006-41mL/min precision peristaltic pump and 180mm Travel moving mechanism, to achieve uniform multi-layer film Preparative.
Rotation speed up to 3000 rpm, Flow rate 35m ³/h, multi-layer stator to pRoduce a strong suction force, continuous dispersion shear emulsification, double mechanical sealing to prevent leakage.
Measurement range 0.03-50 um, resolution 0.01um, supports multi-layer platings and alloy platings measurement, with custom hotkeys and LCD display, easy to operate without adjusting Sensitivity.
The temperature range covers -70 to 150 ° C, uniformity ≤ +/- 2 ° C, equipped with multi-layer conductive film tempered Glass observation window and independent over-temperature protector, supports 120 sets of program settings and power failure recovery functions.
Multi-layer rotating stator structure, Rotation speed of 3000 rpm, Flow rate 20m ³/h, with strong self-priming ability and continuous dispersion emulsification effect, double-end mechanical sealing design effective anti-leakage.
Temperature range -30~ 150 ℃, Temperature Uniformity ≤ +/- 2 ℃, using the upper air supply and lower air return mode and multi-layer conductive film tempered hollow Glass observation window, with multiple Safety protection and environmental protection refrigeration system.
High-speed ADC data collection to achieve 1 μm resolution, with multi-layer coatings simultaneous measurement function, measurement range covering 13~ 1000 μm (epoxy resin) and 300~ 14800 μm (45 #steel), support waveform display and automatic gain switching.
Temperature range from -40 to 150 ° C, Temperature Uniformity ≤ +/- 2.0 ° C, with up-supply air return air circulation system and environmentally friendly refrigerant, equipped with multi-layer conductive film observation window and multiple electrical protection mechanisms.
Temperature range -30~ 150 ℃, Temperature Uniformity +/- 2 ℃, using upper air supply and lower air return mode and porcelain frame nickel-chrome wire heating device, equipped with multi-layer conductive film observation window and independent over-temperature protection system.
Temperature range -60~ 150 ℃, Temperature Uniformity ≤ +/- 2 ℃, equipped with multi-layer conductive film tempered observation window and test hole, support 120 sets of program setting and power failure recovery function, using solid state relay zero-crossing trigger to improve control accuracy.
Integrated Incubator and Shaker functions, small footprint and large bottle load; Temperature range 4~ 65 ℃, Temperature Fluctuation +/- 0.2 ℃; 304 stainless steel liner for easy cleaning, quiet operation and support multi-stage programming.
Equipment line speed of more than 20m/s, multi-layer stator gap is small, shearing fineness is good, can achieve continuous circulation of materials dispersed emulsification, processing viscosity ≤ 20000cps, high emulsification efficiency and pRoduct stability.
Temperature range -60~ 150 ℃, Temperature Uniformity ≤ +/- 2 ℃, using multi-layer conductive film tempered hollow Glass observation window and upper air supply and lower air return mode, equipped with porcelain frame nickel-chrome wire heating device and French Taikang fully enclosed Compressor.
Multi-layer stator structure, Rotation speed of 3000 rpm, Power 45KW Flow rate 80m3/h, with strong self-priming ability and continuous dispersion emulsification effect, double-ended mechanical sealing design to prevent leakage.
