Using PTFE pump head material and coating diaphragm, suitable for strong corrosive gases, pumping speed 20L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, good air tightness and noise less than 58dB.
Using PTFE pump head and diaphragm material, resistant to strong corrosive gases. Pumping speed 60L/min, Ultimate vacuum degree 3-8mbar, with pressure relief and cleaning functions, good air tightness, operating noise less than 58dB.
Using PTFE pump head material and PTFE coating diaphragm, suitable for strong corrosive gases and steam, pumping speed up to 40L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, noise is less than 58dB.
Two-stage pump structure is equipped with PTFE material pump head, strong corrosion resistance, maximum Flow rate 125L/min, Ultimate vacuum degree 15-20mbar, no pollution and maintenance, low noise and low temperature rise.
Pumping speed 1.2m ³/h, Ultimate vacuum degree ≤ 2mbar, sandwich structure PTFE diaphragm and PTFE pipe fittings, compact and continuous operation.
Using electromagnetic motor and diaphragm sealing Chamber, maximum Vacuum Level 0.08Mpa, full Teflon material resistant to strong chemical corrosion, free of daily maintenance and long service life.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
The diaphragm sealing Chamber is used to ensure the one-way flow of gas, the maximum Vacuum Level is 0.08Mpa, the pumping rate is 35L/min, and it has the function of positive and negative pressure dual-use. The full Teflon material can resist strong chemical corrosion, free of daily maintenance and long service life.
PTFE material pump head and composite diaphragm, Maximum Flow rate 20L/min, Ultimate vacuum degree 15-20mbar, with anti-corrosion, low noise, overheating protection function, suitable for corrosion environment.
PTFE material pump head structure can resist strong chemical corrosion, double-stage pump design to achieve 6-8mbar Ultimate vacuum degree, oil-free dry operation to ensure complete recovery of solvent, noise less than 55dB quiet and stable operation.
PTFE material, strong corrosion resistance, Maximum Flow rate 20L/min, Ultimate vacuum degree 15~ 20mbar, no pollution maintenance, low noise stable operation.
Using electromagnetic motor and diaphragm sealing Chamber, the maximum Vacuum Level is 0.08Mpa, full Teflon material is resistant to strong chemical corrosion, free of daily maintenance and long service life, suitable for positive and negative pressure dual-use scenarios.
The integrated pump body structure is adopted, and the forced oil pump lubrication is controlled. The ultimate pressure can reach 0.005mbar, the noise is as low as 58dB, and the parts are few and easy to maintain.
Using electromagnetic motor and diaphragm sealing Chamber, Vacuum Level up to 0.08Mpa, pumping rate 60L/min, non-oil pump design pollution-free, full Teflon material resistant to strong acid and alkali corrosion, free of daily maintenance.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
