Using refractive index Measurement principle, automatic temperature compensation 0-40 ℃, Measurement time of about 1.5 seconds, only 100 μ L sample volume, support PSU, ppt and specific gravity three unit conversion, stainless steel sample Chamber corrosion resistance.
LED Illuminant provides stable performance, with CAL CheckTM Adjustment, Measurement range 0~ 500 ppm CaCO3, accuracy +/- 5 ppm, suitable for seawater and freshwater alkalinity detection.
Conductivity Detector EC measurement, salinity Measurement range 0.0~ 70.0ppt, accuracy +/- 1~ 2ppt. With waterproof design, automatic temperature compensation, unique Graphite electRode anti-oxidation and Repeatability, support a variety of unit display.
Measurement range 200-600ppm, accuracy +/- 6% reading, LED Illuminant 610nm, automatic shutdown function, suitable for seawater calcium Ion concentration detection.
Platinum ElectRode ensures fast and stable measurement, supports 1-3 point calibrating and automatic temperature compensation, salinity Measurement range 0-80ppt, conductivity covers 100μS/cm to 200mS/cm, with automatic end lock and fully waterproof design.
Equipped with 7-inch TFT display, support conductivity, TDS, salinity, resistivity and Conductivity Detector ash 5 kinds of paraMeter measurement, Measurement accuracy of 0.5% F.S, automatic temperature compensation and 1000 groups Data storage function.
Combined ElectRode can simultaneously measure pH, conductivity, TDS, salinity and temperature, support one-button switching paraMeters; Conductivity Detector ElectRode platinum black to reduce Polarization effect, accuracy of +/- 0.01pH; with automatic temperature compensation and IP67 dustproof and waterproof design.
Non-contact Sensor with long life and two Measurement ranges (100 to 55000 μS/cm). The enclosure is made of Acetal Resin, which is resistant to seawater corrosion and supports monthly on-site calibrating for accuracy, with a maximum operating depth of 70 Meters.
Measurement range salinity 0.0~ 28.0%, temperature 10~ 100 ℃, resolution 0.1% Brix, only 0.3mL sample volume, 3 seconds fast results, portable design weight 100g.
Equipped with 7-inch TFT display, support conductivity, TDS, salinity and other 5 paraMeter measurement, Measurement accuracy of 0.5% F.S, with 1000 data storage and automatic temperature compensation function.
Measurement accuracy 0.5% F.S., Conductivity Detector pool constant K = 0.1/1/10 optional, built-in 500 data storage and automatic temperature compensation to ensure accurate measurement of full scale.
Support conductivity, TDS, salinity and resistivity Multi-ParaMeter measurement, conductivity range 0.000 μS/cm to 1000mS/cm, with intelligent end point determination and automatic temperature compensation function.
Measurement accuracy of 0.5% and automatic temperature compensation, 1 to 5 point calibrated and 500 data storage, ElectRode constant selection and salinity Measurement mode.
The range covers 0.150-300g/L NaCl, automatically recognizes the calibrating point, fixed temperature compensation 25 ℃, large LCD screen displays salinity and temperature at the same time, easy and stable operation.
Simultaneous measurement of conductivity, resistivity, TDS, salinity and temperature, support automatic temperature compensation and ElectRode diagnosis, Data storage 450 groups, with IP54 dustproof and waterproof rating, Measurement accuracy up to +/- 1.0% FS.
