Measurement accuracy XY +/- 0.5μm, Z +/- 1μm. Support multi-depth fusion and 2D to 3D imagery, can automatically collect images in the range of 10μm~ 100μm, and the repeability Measurement accuracy error is controlled within 5%.
The swirl/spin design is firm and abrasion-free, with a three-dimensional roll tilt angle of 10 °, a speed range of 10-70rpm, and a maximum load of 5kg. It can be used in low temperature and Thermal Chambers.
With red and blue laser dual mode fast switching, accuracy up to 0.03mm, scanning rate of 480,000 times/second, support automatic positioning and dynamic measurement, external environment influence is small, can work in direct sunlight.
Adopting crane bearing swirl/spin design, no abrasion and suitable for long-term operation; speed range 10-80rpm, maximum load 5kg; molded shell is acid and alkali resistant and easy to clean, can be used in the refrigerator.
Acceleration Meter to achieve three-dimensional vibration measurement, Frequency range 10Hz-10KHz, accuracy +/- 5% + 2 words, bearing condition measurement and automatic shutdown function, weight only 130 grams.
Simultaneous measurement of three-axis or single-axis vibration paraMeters, Frequency range up to 10Hz-10KHz, Support for Displacement, Speed and Acceleration Measurement modes, with AC signal output for auscultation recording.
With red and blue dual laser scanning mode fast switching, the highest accuracy of 0.03mm, scanning rate of 320000 times/second, support automatic positioning and dynamic measurement, environmental adaptability.
Can simultaneously display three-direction vibration paraMeters, support Acceleration, Speed, Displacement measurement, Acceleration Frequency range of 10Hz~ 10kHz, with AC signal output and a variety of Interface, easy to field detection and data recording.
With paint penetration measurement ability, accurate measurement of wall thickness without removing coatings, thickness range 2.5~ 125mm, accuracy +/- 0.03mm, support multi-echo and single-echo mode switching, suitable for detection needs of different surface conditions.
Made of stainless steel, with 6 cutter tooth designs, with a cutter tooth spacing of 3mm, strong durability and stable cutting effect, suitable for accurate paint film testing requirements.
With three light source system, can simulate D65, D50 and TL84 environment, color rendering index up to 98, all metal material to ensure durability, table size 1350 * 900mm, slope design to optimize visual observation.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Measurement of thick soft coatings such as polyurea and asphalt, thickness range 50 to 7600 μm, storage of 100,000 readings, ASTM D6132 compliant, non-destructive ultrasonic technology, durable and easy to operate.
The number of teeth 6, spacing 3mm, using circumferential multi-faceted cutter surface design, long service life, suitable for film thickness greater than 120 μ m hard substrate test cross-cut.
Designed according to ASTM D2801 standard, the groove depth range is 0.1-4 mm, which can test the leveling and sagging of coatings for rapid formulation adjustment and qualification verification.
