Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1s, using national standard design, can accurately detect Pulp suspension filtration rate.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1 seconds, cone rising speed 100 +/- 10mm/s, used to detect Pulp suspension filtration rate, in line with ISO 5267-1 international standards.
Measurement range 0~ 100 ° SR, cone rising speed 100 +/- 10mm/s, suitable for all kinds of Pulp suspensions, can use raw materials economically and end the Refining process in time, simple and reliable operation.
It can measure the range of 0-1000CSF, with an accuracy of 10CSF, using 304 stainless steel material and silicone sealing ring structure, with self-Adjustment, suitable for various Pulp water filtration change detection.
Using electronic technology and LCD screen, impeller rotation frequency 49 +/- 1.5S-1, motor power 370W, wet dissociation pulp to maintain the original fiber structure, easy to operate.
Made of stainless steel, with a pulp diaMeter of 50mm and a Rod length of 500mm, it is suitable for medium and low viscosity mixing. Medium and high speed operation provides efficient mixing effect.
Adopting 1000-5000rpm variable frequency speed regulation technology, equipped with 370W motor and 3L capacity container, it can achieve efficient dissociation without destroying the fiber structure, meeting the processing requirements of different Pulp samples.
4-Stage screening system, Water Flow rate 2-18L/min adjustable, screening time 0-9999min can be set, 304 stainless steel structure to ensure durability, to meet a variety of international standards testing requirements.
Equipped with a 60mm diaMeter 304 stainless steel dispersion plate, it is corrosion-resistant and easy to clean; the lifting stroke is 11 to 42 centiMeters, which can be flexibly adapted to different containers; the handling capacity is up to 25 liters, meeting the needs of medium-scale experiments.
Using impeller Rotation Frequency 48.3 +/- 1.6655-1, the container size is Φ 152 * 191mm, and the interwOven fibers are separated in water by mechanical treatment to keep the original appearance of the fibers unchanged and ensure the Reliability of experimental data.
Standard Processing capacity 500-10000ml, suitable for HR series Disperser, suitable for efficient dispersion processing of large-volume samples.
Measurement range 0-100 ° SR, equipped with a special measuringflask to directly display the Freeness/Schopper-Riegler value, without conversion, the test water temperature is controlled at 20 +/- 0.5 ° C to ensure accurate and reliable detection results.
Using arc surface drying plate design, the maximum temperature can reach 180 ℃, Heating power 2500W, the steam is quickly discharged during the drying process, easy to operate and maintenance-free.
Adopting frequency conversion stirring technology, the impeller Rotation speed can be adjusted from 1000-3600rpm, and supports two test modes of counting and not counting to ensure that the fiber retains its original structural properties during the wet dissociation process.
Using 48.3 +/- 1.65S impeller Rotation Frequency and 2900 +/- 100rpm Rotation speed, the fibers were separated gently through four inner helical baffles, keeping the original structural characteristics of the fibers unchanged.
