With 3000 times/min and 6000 times/min two vibration frequencies, the amplitude can be continuously adjusted between 0mm and 3mm, supporting three modes of subtle vibration, intermittent vibration and continuous vibration, suitable for ≤ 325 mesh material analysis.
Vibration frequency up to 6000 times/min, amplitude 0-3mm continuous adjustment, support subtle, intermittent and continuous three vibration modes, reduce operating intensity and improve efficiency.
Screening area of 54200m ², Vibration Frequency 400-3000 times/min adjustable, amplitude 3.2 +/- 0.1mm, compact size easy to operate, screen plate easy to disassemble, optional different gap specifications to adapt to a variety of Stocks.
Equipped with 45μm sieve and 70rpm Rotation speed, it is suitable for powders or particles dispersed in water, providing stable screening performance and easy and reliable operation.
With two movements of reciprocating and top-beating vibration, the screening efficiency is high and does not block the screen surface. It can be adapted to a set of screening screens of Φ 200, Φ 75, and Φ 100. The number of swirl/spins is 290 +/- 6 times/minute, and the number of beats is 156 +/- 3 times.
Frequency 159.2Hz, Acceleration output 14.14m/s ², Maximum load 150g, compact and portable, fast heating, low lateral output, suitable for rapid vibration detection system.
Using U-tube oscillation principle, density resolution of 0.0001g/cm ³, built-in injection pump and video camera function, automatic cleaning and drying, support concentration conversion and a variety of output methods.
Using U-tube oscillation principle, with Peltier precise temperature control technology, density resolution of 0.0001g/cm ³, built-in injection pump and drying air pump, automatic injection, cleaning and drying, high-resolution video direct observation of samples to avoid bubble influence.
Measurement accuracy of 0.001g/cm ³, built-in automatic sampling pump and high-resolution video observation function, support for Peltier temperature control technology, ensure accurate and reliable test results.
Using U-tube oscillation principle, density resolution of 0.0001g/cm ³, built-in injection pump and video camera, automatic cleaning and drying, support concentration conversion and a variety of Data output methods.
Using U-tube oscillation principle, density resolution of 0.0001g/cm ³, repeatability error of 0.0006g/cm ³, built-in injection pump and video camera, automatic cleaning and drying, support concentration conversion and a variety of data output.
Frequency 159.2Hz, Acceleration output 10m/s ², Support 150g load verification, Transverse output less than 5%, Heating time less than 3 seconds, Compact handheld design for fast detection.
Horizontal Vibration Technology, Vibration Frequency 45-200Hz Adjustable, Throwing plate diaMeter 300mm, can handle multiple samples and automatically complete the polishing process.
Acceleration Meter to achieve three-dimensional vibration measurement, Frequency range 10Hz-10KHz, accuracy +/- 5% + 2 words, bearing condition measurement and automatic shutdown function, weight only 130 grams.
Four removable baffles are used to break the powder drop, equipped with 1.18mm aperture sieve and 25mL +/- 0.05mL glassgraduates with scale, and the measurement Stability is guaranteed by the vibration-free base, which is suitable for the accurate determination of loose density.
