Using EPA custom Illuminant and chroma compensation technology, Measurement range 0.00-4000 NTU, minimum detection limit < 0.02NTU, support automatic range conversion and multiple calibrate modes to ensure the accuracy of low turbidity measurement.
Simultaneous measurement of turbidity, residual chlorine and total chlorine with EPA custom Illuminant, USEPA 180.1 compliant, automatic range conversion, turbidity Measurement range from 0.00 to 4000 NTU, support for multi-unit display and GLP data management.
Equipped with fixed K-type stainless steel penetration Probe, Response Time 20 seconds, IP65 waterproof standard, with CAL Check ™ calibrate inspection and battery error prevention system to ensure accurate and reliable measurement.
With high and low turbidity ranges (0.00-9 and 100-1000NTU) and residual chlorine total chlorine measurement (0.00-5 mg/L), using EPA-specific Illuminant, supporting chroma compensation and Automatic calibration, storing 200 sets of data, suitable for a variety of water quality testing scenarios.
With split Probe design, equipped with F and N Probe, Measurement range 0~ 1500 microns, resolution 0.1 microns, automatic identification of substrate type, support for more than 60 readings per minute, Protection Rating IP65.
Measurement principle of 90 ° scattered light, Measurement range 0~ 400NTU, resolution 0.01, High Accuracy Optical Path System and Stable Circuit, Support Multi-turbidity Unit switch, with print interface to ensure long-term reliable work.
The principle of scattered light is used for measurement turbidity, the measurement range is 0-200NTU, the resolution is 0.01NTU, the linearity is good and the operation is convenient, and it is suitable for a variety of water quality testing scenarios.
Response Time of only 4 seconds, temperature range of -50.0 to 300 ℃, equipped with replaceable ultra-fast Response K stainless steel penetration Probe, with CAL Check ™ calibrate inspection and automatic shutdown function.
Maxwell turbidity unit measurement of bacterial concentration, resolution 0.001 MCF, range 0-6MCF, with High Accuracy optical path system and low drift circuit, can store 20 records to ensure measurement accuracy and Repeatability.
Using fixed K type stainless steel penetration type temperature sensor, Response Time 20 seconds, temperature range coverage -50.0 to 300 ℃, in line with IP65 waterproof standards, to ensure stable work in harsh environments.
Adopt wear-resistant ruby Probe, measurement range 0~ 5000μm, error +/- 2~ 3%, with IP65 dustproof and waterproof characteristics, chemical-resistant material is suitable for chemical cleaning, Probe line drag chain type can be bent arbitrarily.
Measurement principle of 90 ° scattering light, Measurement range 0~ 200NTU, resolution 0.01, High Accuracy optical path system and stable circuit, support a variety of turbidity Unit switch, suitable for long-term stable operation.
Simultaneous measurement of 7 water quality paraMeters, turbidity Measurement range 0-50NTU, accuracy +/- 5%, in line with USEPA 180.1 standard, with chroma compensation and Illuminant automatic compensation function, reducing interference without frequent calibrating.
High Accuracy Optical Path System to Ensure Measurement Correctness and Repeatability, Measurement range 0~ 6.000MCF, Zero drift +/- 1.5%, Support Multi-turbidity Unit Selection, Circuit Stable and Long Illuminant Life.
Using split Probe design, Probe can be plugged and interchanged, Measurement accuracy of +/- 2% H + 1 μm, high wear-resistant carbide Probe service life of more than 500,000 times, support a variety of Calibration methods and data statistics.
