Sample pRoduction takes only 3-5 minutes without Resin solidification, cutting range 0.05-50 mm ², total video magnification 20-300X, Modular design to achieve pipeline operation, improve inspection accuracy and efficiency.
Smoothness of the terminals with 1-2 minutes processing time; 45-512x Ultra Depth of Field Optical inspection system with 1-2µm Measurement accuracy and 0.01-120 mm ² wire range.
Maximum cutting section of 100 * 100mm, equipped with bilateral fixture and circulating chilling down system, the surface of the sample after cutting is bright and flat without burns, easy maintenance.
Adopt gravity manual cutting method, the maximum cutting section is 85 * 85mm, equipped with bilateral fixture structure and closed cutting Chamber, built-in LED lighting and circulating chill down system to ensure the cutting mass.
Adopt gravity manual cutting method, the maximum cutting section is 85 * 85mm, equipped with bilateral fixture structure and closed cutting Chamber, built-in LED lighting and circulating chill down system to ensure the cutting mass and easy observation and operation.
Suitable for metallographic sample cutting, the maximum cutting cross section of 65 * 65mm, spindle Rotation speed 2800rpm, equipped with circulating chilling down system, the surface of the sample after cutting is bright and flat without burns, easy to operate.
The equipment adopts 4-sided Heating mode, the maximum temperature is 1000 ℃, and the temperature control accuracy is +/- 2 ℃. It has the function of intelligent segmented control time and temperature, automatic alarm and cut off heating over temperature to ensure the safety and stability of the experiment.
Laminating surface design, Film thickness 0.29mm, no fluorescent whitening agent, solvent resistance and chemical resistance, Laminating uniform and with annotation section for easy recording of test information.
Using 2800rpm Rotation speed and 2.2kW Power, equipped with fast fixture and chill down system, can cut 50mm cut sample, easy operation and maintenance.
Using mobile sleeve liquid complex and silver ion trap structure, the film resistance is less than 50MΩ, Measurement range covers 0-11pH, temperature tolerance 0-80 ℃, to ensure stable and accurate PH detection.
Using film lamination process, with solvent resistance and chemical resistance, paper Film thickness 0.29mm, Laminating to ensure uniformity of Spreader, with annotation section for easy recording of test information.
Using film lamination technology, with excellent solvent and chemical resistance, paper Film thickness 0.29mm and no fluorescent whitening agent, ensure Spreader uniformity and with annotation section for easy recording.
Using film lamination technology, with excellent solvent and chemical resistance, paper Film thickness 0.29mm, surface Laminating to ensure Spreader uniformity, with annotation section for easy recording of test data.
Mirror stainless steel liner and tube flow circulating fan, Humidity control accuracy, high temperature fluctuation +/- 0.5 ℃, support 99 cycles, each section of 99 hours, to ensure experimental uniformity and Reliability.
Using 1800 type silicon molybdenum Rod heating element, double-decked shell structure design, temperature control accuracy up to +/- 1 ℃, heating rate ≤ 20 ℃/min, with temperature field equilibrium, low surface temperature, energy saving and high efficiency.
