The device places the test plate in parallel in the wind tunnel, the wind speed control accuracy is 3 +/- 0.3m/s, the drying time is automatically controlled, and the surface crazing can be visually inspected, which is suitable for the evaluation of coating anti-crack performance.
Adopting axial flow fan to supply air, the wind speed can be adjusted steplessly, the wind speed in the wind tunnel is 3 +/- 0.3m/s, and it is equipped with Handheld AnemoMeter measurement, which is suitable for coating drying anti-crack performance testing.
With ten independent flaw detection channels, the gain range is 120dB, the frequency band is 0.4~ 20.0MHz, and it supports automatic generation of DAC Linear dispersion and 500 data storage for efficient defect identification.
With 130dB high gain and Automatic calibration function, support 100 independent flaw detection channels and 1000 waveform storage, Scanning range 0-10000mm, to meet the needs of a variety of material flaw detection.
With 16 flaw detection channels and 0.5~ 20MHz Frequency range, it supports Automatic calibration probes and generates DAC Linear dispersion. High Sampling rate and low noise design meet a variety of operating conditions inspection needs.
The device provides 3 +/- 0.3m/s wind speed through axial flow fan in wind tunnel, Timer delay range of 0.01 seconds to 99 hours 99 minutes, can automatically control drying time and eye test plate surface crazing, support parallel test.
With 100 flaw detection channels and 300 graphics storage capacity, support three probe modes and automatically generate DAC Linear dispersion, waterproof and dustproof design to adapt to harsh environments, Operating temperature range -27~ 70 ℃.
With DAC Linear dispersion automatic generation function, transmission Frequency up to 1000Hz, support 6 Meters detection range and 10 independent flaw detection channels, real-time dynamic video recording and automatic measurement crazing depth.
The wind speed is controlled in the range of 3 +/- 0.3m/s, equipped with axial flow fan and automatic timing function, which can simulate the drying process under specified conditions and effectively detect the surface crazing of the material.
With a wide frequency range of 64Hz-2MHz, it can detect longitudinal crazing and transverse defects, adapts to a variety of Probe types, supports automatic phase analysis and zero correction functions, and is suitable for high-speed inspection environments.
Scanning range 0-10000mm, working time 8 hours, waterproof and dustproof function, support 100 flaw detection channels and three probe modes, can automatically generate DAC Linear dispersion and store 300 inspection data.
Scanning range 0-6000mm, 100 independent flaw detection channels, support Automatic calibration and defect echo positioning, with high-brightness color display and three-proof design, adapt to various complex working environments.
Detection range 0-1000mm, dynamic range is greater than 36dB, with Automatic calibration and gate alarm function, support for a variety of working modes of straight oblique probes, compact and portable for field operations.
Scanning range 0-10000mm, working time 8 hours, waterproof and dustproof function, support 100 flaw detection channels and three probe modes, can automatically generate DAC Linear dispersion and store 300 A-shaped graphics.
With 15 independent flaw detection channels and Automatic calibration function, the near-field blind area is small to meet the thin-walled tube detection, the working Frequency is 0.4MHz~ 15MHz, the Continuous Operating Time is more than 8 hours, and the waterproof, oil-proof and dust-proof design is supported.
