Measurement accuracy XY +/- 0.5μm, Z +/- 1μm. Support multi-depth fusion and 2D to 3D imagery, can automatically collect images in the range of 10μm~ 100μm, and the repeability Measurement accuracy error is controlled within 5%.
Using 2268 +/- 7g standard brush parts, sanding speed 50cpm, automatic counting function to ensure test Repeatability, linear reciprocating motion simulates actual sanding conditions.
Easy to use magnetic suction Cup loading and unloading, sanding times 0~ 9999 two-way count, friction load 570 +/- 20g, additional weight adjustment load, suitable for undercoating and putty anti-sanding performance test.
With 0~ 135cpm friction speed range and 155mm Test Travel, using two-way counting system, can be configured with additional weight adjustment load, suitable for a variety of sample size sanding resistance test.
The swirl/spin design is firm and abrasion-free, with a three-dimensional roll tilt angle of 10 °, a speed range of 10-70rpm, and a maximum load of 5kg. It can be used in low temperature and Thermal Chambers.
Adopt 37 +/- 2cpm friction speed, 300mm sanding Travel, 1000g standard load, automatic counting to set value stop, Repeatability is excellent.
Friction speed 0~ 135cpm, Test Travel 155mm, round-trip count 0~ 9999, suitable for accurate determination of sanding performance of undercoat and putty.
With red and blue laser dual mode fast switching, accuracy up to 0.03mm, scanning rate of 480,000 times/second, support automatic positioning and dynamic measurement, external environment influence is small, can work in direct sunlight.
Adopt double grinding head linear friction mode, load 570 +/- 20g adjustable, working plate Rotation speed 0~ 135rpm, magnetic chuck design makes sample loading and unloading convenient, the counter directly reads the number of sanding.
The use of diamond sanding needles can flatten the surface of the grinding wheel, improve the utilization rate of abrasive wheels, and is equipped with a water supply system to support wet grinding and dry grinding. The size of abrasive wheels is about 250 × 30 × 32mm, and the Rotation speed is 1400rpm.
Using diamond sanding needle to smooth the surface of abrasive wheels, abrasive wheels stepless speed range of 500~ 1450rpm, equipped with stainless steel settling filtrate drawer to prevent clogging, wet grinding dry grinding can be applied.
Adopting crane bearing swirl/spin design, no abrasion and suitable for long-term operation; speed range 10-80rpm, maximum load 5kg; molded shell is acid and alkali resistant and easy to clean, can be used in the refrigerator.
Simultaneous measurement of three-axis or single-axis vibration paraMeters, Frequency range up to 10Hz-10KHz, Support for Displacement, Speed and Acceleration Measurement modes, with AC signal output for auscultation recording.
Acceleration Meter to achieve three-dimensional vibration measurement, Frequency range 10Hz-10KHz, accuracy +/- 5% + 2 words, bearing condition measurement and automatic shutdown function, weight only 130 grams.
With red and blue dual laser scanning mode fast switching, the highest accuracy of 0.03mm, scanning rate of 320000 times/second, support automatic positioning and dynamic measurement, environmental adaptability.
