Adopt thyristor touchpoint switch, low noise and long life. Electromagnetic yoke pole spacing 0-250mm, lifting force greater than 5kg, support living joint adjustment, suitable for plane curved surface and complex shape workpiece detection.
With ten independent flaw detection channels, the gain range is 120dB, the frequency band is 0.4~ 20.0MHz, and it supports automatic generation of DAC Linear dispersion and 500 data storage for efficient defect identification.
The equipment adopts the principle of magnetic field magnetization, lifting force of 7.5Kg, Scanning range of 20~ 200mm, equipped with LED lighting and movable joints, suitable for the detection of various shapes of workpieces.
Adopt magnetic yoke structure, lifting force up to 7.1kg, pole distance adjustable 0-220mm, Sensitivity to meet A1 test piece display requirements, suitable for welding and Pressure Vessel internal work.
With 130dB high gain and Automatic calibration function, support 100 independent flaw detection channels and 1000 waveform storage, Scanning range 0-10000mm, to meet the needs of a variety of material flaw detection.
It can detect 0.5-3 mm surface defects, detect a minimum width of 0.1 micron, and is equipped with four Probe to adapt to different shapes of workpieces. It is ergonomically designed for easy operation and control.
With 16 flaw detection channels and 0.5~ 20MHz Frequency range, it supports Automatic calibration probes and generates DAC Linear dispersion. High Sampling rate and low noise design meet a variety of operating conditions inspection needs.
Measurement range 0.5-3000 μm, maximum resolution 0.1μm, support more than 30 image analysis functions, Particle size distribution and morphology analysis.
Equipped with 8 adapters of different specifications, the specifications cover M6 to M20, and are suitable for a variety of bolt sizes to ensure compatibility and accuracy of testing.
Equipped with 1 tie Rod and 10 adapters, the specifications cover M6 to M24, and are suitable for a variety of bolt sizes to ensure test compatibility and ease of operation.
The image method is used to analyze the particle morphology and particle size, the test range is 1~ 3500 μ m, the system magnification is 4000 times, the automatic segmentation success rate exceeds 93%, and paraMeters such as length-diaMeter ratio and sphericity can be counted.
With 100 flaw detection channels and 300 graphics storage capacity, support three probe modes and automatically generate DAC Linear dispersion, waterproof and dustproof design to adapt to harsh environments, Operating temperature range -27~ 70 ℃.
With DAC Linear dispersion automatic generation function, transmission Frequency up to 1000Hz, support 6 Meters detection range and 10 independent flaw detection channels, real-time dynamic video recording and automatic measurement crazing depth.
Contains 12 types of tie Rods and adapters from M6 to M30, suitable for a wide range of bolt sizes, providing comprehensive inspection coverage.
Using light scattering principle to detect 0.3-10 μ m particle size, Sampling flow rate 28.3L/min, built-in lithium battery supports 6 hours of work, can directly save data to U disk, equipped with thermal printer for on-site output.
