Using refractive index Measurement principle, automatic temperature compensation 0-40 ℃, Measurement time of about 1.5 seconds, only 100 μ L sample volume, support PSU, ppt and specific gravity three unit conversion, stainless steel sample Chamber corrosion resistance.
LED Illuminant provides stable performance, with CAL CheckTM Adjustment, Measurement range 0~ 500 ppm CaCO3, accuracy +/- 5 ppm, suitable for seawater and freshwater alkalinity detection.
Polarographic analysis technology, accuracy of +/- 1.0% FS, support automatic temperature compensation 0~ 60 ℃ and salinity compensation, with RS-485 communication interface and 4~ 20mA current output, strong anti-interference ability.
Measurement range 200-600ppm, accuracy +/- 6% reading, LED Illuminant 610nm, automatic shutdown function, suitable for seawater calcium Ion concentration detection.
Platinum ElectRode ensures fast and stable measurement, supports 1-3 point calibrating and automatic temperature compensation, salinity Measurement range 0-80ppt, conductivity covers 100μS/cm to 200mS/cm, with automatic end lock and fully waterproof design.
Non-contact Sensor with long life and two Measurement ranges (100 to 55000 μS/cm). The enclosure is made of Acetal Resin, which is resistant to seawater corrosion and supports monthly on-site calibrating for accuracy, with a maximum operating depth of 70 Meters.
Equipped with 7-inch TFT display, support conductivity, TDS, salinity, resistivity and Conductivity Detector ash 5 kinds of paraMeter measurement, Measurement accuracy of 0.5% F.S, automatic temperature compensation and 1000 groups Data storage function.
With 7-inch TFT display and 1000 data storage, it supports Multi-ParaMeter measurement such as conductivity, TDS, salinity, etc., with an accuracy of 0.5% F.S., automatic temperature compensation and calibrated reminder function to ensure measurement Reliability.
Measurement range salinity 0.0~ 28.0%, temperature 10~ 100 ℃, resolution 0.1% Brix, only 0.3mL sample volume, 3 seconds fast results, portable design weight 100g.
Equipped with 7-inch TFT display, support conductivity, TDS, salinity and other 5 paraMeter measurement, Measurement accuracy of 0.5% F.S, with 1000 data storage and automatic temperature compensation function.
Conductivity Detector EC measurement, salinity Measurement range 0.0~ 70.0ppt, accuracy +/- 1~ 2ppt. With waterproof design, automatic temperature compensation, unique Graphite electRode anti-oxidation and Repeatability, support a variety of unit display.
Combined ElectRode can simultaneously measure pH, conductivity, TDS, salinity and temperature, support one-button switching paraMeters; Conductivity Detector ElectRode platinum black to reduce Polarization effect, accuracy of +/- 0.01pH; with automatic temperature compensation and IP67 dustproof and waterproof design.
Support conductivity, TDS, salinity and resistivity Multi-ParaMeter measurement, conductivity range 0.000 μS/cm to 1000mS/cm, with intelligent end point determination and automatic temperature compensation function.
Measurement accuracy of 0.5% and automatic temperature compensation, 1 to 5 point calibrated and 500 data storage, ElectRode constant selection and salinity Measurement mode.
The range covers 0.150-300g/L NaCl, automatically recognizes the calibrating point, fixed temperature compensation 25 ℃, large LCD screen displays salinity and temperature at the same time, easy and stable operation.
