The split structure can measure pipes with an inner diaMeter greater than 40mm, equipped with a 3.5-inch color Touchscreen, supports a Ra Measurement range of 0.005-32μm, and has Bluetooth interconnection and various Linear dispersion analysis functions.
It can be extended by 50mm, and up to 2 pieces can be installed to achieve 100mm deep hole measurement; it is suitable for deep hole internal surface roughness detection, and needs to cooperate with the measurement platform to ensure Stability.
With bottle bottom and bottle wall double measurement function, test resolution of 0.001mm, no power supply, easy and fast operation, suitable for large bottles such as wine bottles and infusion bottles.
With bottle bottom and bottle wall double measurement function, test resolution of 0.001mm, no power supply, easy and fast operation, suitable for small volume bottles such as ampoules and vials, general structure design is simple and durable.
It can measure the groove surface roughness with a groove width greater than 3mm and a groove depth less than 10mm, and is compatible with flat and cylindrical measurement. It can be used with the measurement platform to achieve accurate detection.
The equipment has a 15-liter large-capacity water Tank and an 8mm inner diaMeter water pipe, supports 0 to 99 hours of time control, adopts stainless steel structure and automatic control device, and is suitable for coating stain resistance testing.
Measurement range from 5mm, depth up to 22mm, suitable for a variety of Roughness Gauge to achieve profiled surface detection.
DSP chip control, Measurement speed and low power consumption; Support 160μm large-range measurement, up to 320μm; Multi-ParaMeter measurement function, compatible with ISO, DIN, ANSI, JIS multiple national standards.
The stainless steel pendulum pipe is used to achieve +/- 180 degree swing, equipped with 25 water spray holes and 1-4 rpm adjustable turntable, supporting 50-100kpa water pressure adjustment, and the test water can be recycled without additional waterproof treatment.
It can measure planar and cylindrical surface roughness, with a minimum diaMeter of 5mm and a maximum depth of 22mm, and supports a variety of Sensors to adapt to different workpiece shapes.
Impact accuracy is ensured by double-tube guide structure, the maximum impact energy can reach 320J, the impact height error is controlled within +/- 2mm, and the automatic hammer lifting function is equipped to prevent secondary impact.
The large diaMeter design is used to facilitate sample pouring in and out, the inner wall arc transition is easy to clean, and the accuracy is controlled within 0.2% to ensure reliable measurement results.
Temperature range -40~ 150 ℃, Temperature Uniformity ≤ 2.0 ℃, mirror stainless steel inner wall and binary cascade refrigeration system, equipped with observation window and anti-condensation device.
Using aluminum alloy material, the accuracy is controlled within 0.2%, the inner wall arc transition is easy to clean, and the lid small hole design can overflow excess samples to avoid bubbles and improve the test accuracy.
Frequency range 50Hz~ 12MHz, gain 0~ 90dB continuously adjustable, with relatively independent test channels and a variety of Display modes.
