The equipment adopts reticulated roller painting technology, Spreader thickness range 0.005-3mm, equipped with 1 Meter Air-Cooled curing box and feeding trough heating function, the temperature can reach 200 ℃, to achieve accurate Spreader control and stable composite effect.
Equipped with double spray guns to achieve uniform lame plating, the lifting range of the spray gun is adjustable from 10-500mm, the integrated air filtrate adjustment system supports magnetic or vacuum panel fixing, and improves the coating test Repeatability.
It can reduce the operating noise of the air Compressor by 10 decibels, and is equipped with moving wheels for easy handling. The iron shell box structure effectively isolates the transmission of noise, making it suitable for air Compressor equipment with various pump head configurations.
The iron shell structure is equipped with moving wheels, which can reduce the running noise of the four-pump air Compressor by 10 dB, effectively controlling it within the comfort range of 51 +/- 5 dB, and the bottom wheels are convenient for equipment movement.
Two-stage pump structure is equipped with PTFE material pump head, strong corrosion resistance, maximum Flow rate 125L/min, Ultimate vacuum degree 15-20mbar, no pollution and maintenance, low noise and low temperature rise.
Pump-suction sampling and a variety of detection principles, Response Time ≤ 20 seconds, accuracy ≤ +/- 3%, built-in 3800mAh battery, support 120,000 sets of Data storage and Temperature Humidity detection.
Using PTFE pump head material and PTFE coating diaphragm, suitable for strong corrosive gases and steam, pumping speed up to 40L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, noise is less than 58dB.
Adopt 3 pump head piston structure, Power 2250W, gas storage Tank 90L. Pure oil-free design ensures clean gas, internal anti-rust treatment improves safety, ultra-quiet operation and low energy consumption, suitable for demanding application environments.
Using reticulated roller painting technology, Spreader thickness range 0.005-3mm, bonding speed 1~ 10m/min servo control, drying temperature up to 200 ℃, suitable for a variety of non-elastic material composite processing.
Using PTFE pump head material and coating diaphragm, suitable for strong corrosive gases, pumping speed 20L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, good air tightness and noise less than 58dB.
It can reduce the noise of the air Compressor by 10dB, effectively controlling the noise within the range of 51 +/- 5 decibels. The iron shell structure is equipped with bottom wheels for easy movement.
PTFE material pump head structure can resist strong chemical corrosion, double-stage pump design to achieve 6-8mbar Ultimate vacuum degree, oil-free dry operation to ensure complete recovery of solvent, noise less than 55dB quiet and stable operation.
Flow rate of spray 0-80CFM adjustable, spray distance 3-4 feet, visualize airflow direction and speed, support 30 minutes of continuous spray, easy flow and pressure equilibrate test.
Using PTFE pump head and diaphragm material, resistant to strong corrosive gases. Pumping speed 60L/min, Ultimate vacuum degree 3-8mbar, with pressure relief and cleaning functions, good air tightness, operating noise less than 58dB.
The pure oil-free design ensures that the gas is free of oil pollution. The Power 3000w provides strong power, with noise as low as 62dB. It is equipped with 4 pump heads to improve exhaust efficiency. The air pressure can be adjusted within the range of 5 to 8 Bar to meet different needs.
