Pressure Silent Oil-Free Air Compressor

The pressure silent oil-free air compressor uses a motor to drive the piston for compressing air, eliminating the need for lubricating oil, and employs soundproofing materials to reduce noise. It is used for supplying air to laboratory instruments, preventing oil contamination of test samples and maintaining a quiet environment.
Selection
When selecting, consider the exhaust pressure matching the instrument's requirements, the exhaust volume meeting the frequency of use, the noise level suiting the working environment, the air tank capacity ensuring stable air supply, and pay attention to power specifications and heat dissipation requirements.

Terms

Standards

Instruments

Noise as low as 52 dB, pure oil-free design ensures zero gas pollution, equipped with 60L buffer Tank and electronic start-stop controller, providing stable air pressure output, suitable for a variety of industrial environments.

$ 961.00

Adopting a pure oil-free lubrication piston system, the noise value is only 59dB, and it is equipped with a 60L anti-rust treatment gas storage Tank. The air pressure can be adjusted within the range of 5-8Bar, and it has multiple automatic protection functions.

$ 1042.00

Noise is as low as 54 decibels at work, displacement is 155 liters per minute, pure oil-free piston system ensures clean gas, Nano coating cylinder liner enhances durability, automatic start-stop saves energy and saves electricity.

$ 832.00

The exhaust capacity is 462L/min, the noise is as low as 53dB, the pure oil-free design ensures that the gas is clean, and the automated operation does not require special personnel to be on duty, which can be adapted to a variety of industry needs.

$ 1832.00

Adopting oil-free piston technology, the working noise is only 62dB, equipped with a 50L gas storage Tank, the pressure switch automatically controls start and stop, and supports 5-8Bar pressure range adjustment to ensure stable air supply.

$ 394.00

Adopting an oil-free design to avoid pollution, the working noise is only 54dB, equipped with a 9L gas storage Tank to ensure stable pressure, the pressure switch can automatically start and stop between 5-8Bar, and the exhaust volume can reach 120L/min to meet the continuous gas demand.

$ 259.00

Noise at work is only 53dB, pure oil-free lubrication piston system to ensure clean gas, Power 1800W, exhaust 354L/min, automatic start-stop design energy saving and worry-free, cylinder liner using Nano coating technology to extend life.

$ 1348.00

Adopting oil-free piston compression technology, the exhaust pressure is 8 Bar, the exhaust volume is 1500L/min, and the noise is only 72dB. It is equipped with a 330L air storage Tank and an automatic pressure switch to ensure a stable air supply.

$ 2252.00

Adopt piston structure, running Power 550W, noise value 58dB, with pure oil-free design, output gas clean, air pressure adjustable range 5-8Bar, automatic start-stop protection, service life of more than 15,000 hours.

$ 606.00

The pure oil-free design ensures that the gas is clean, the noise is as low as 52 decibels, the exhaust volume is 152L/min to meet the demand for high-efficiency gas supply, and the automatic start and stop saves energy and worry, and the safety protection is perfect.

$ 577.00

With Nano coating cylinder liner system, the noise is as low as 51dB, the exhaust pressure is 8Bar, the exhaust volume is 118L/min, with automatic protection system and anti-rust treatment, and the operating life is up to 20,000 hours.

$ 638.00

The noise during operation is only 52dB, using a pure oil-free lubrication piston system, with clean exhaust; Power 1200W, exhaust capacity 236L/min, equipped with an automatic protection system, no need for special personnel on duty, and a lifespan of more than 20,000 hours.

$ 945.00

The pure oil-free design ensures that the gas is clean, the noise is only 53 decibels, the exhaust volume is 230L/min, the automatic start-stop energy saving and worry-free, and the anti-rust and anti-bacterial treatment of the gas storage Tank ensures safety.

$ 1013.00

Adopt oil-free piston technology to avoid oil pollution, working noise is as low as 54 decibels, exhaust pressure is 8 Bar, and it has a 120 liters/minute Flow rate. Equipped with multiple protection devices such as 25 liters gas Tank and safety valve.

$ 314.00

Adopting oil-free piston compression technology, Operating Pressure 8Bar, the exhaust volume reaches 350L/min, the noise is as low as 57 decibels, and it is equipped with a 50L air storage Tank and automatic pressure switch control to ensure a stable air supply.

$ 411.00

Articles

The Printability Tester Simulates the Effects of Different Printing Pressures on Offset Ink Transfer Rate.
This paper investigates how the printability tester simulates the effect of different pressures on ink transfer rate in offset printing.
Application of Flexographic Proofing Press in Evaluating Color Reproducibility of Flexographic Inks
This article primarily discusses the use of a flexographic proofer to evaluate the color reproducibility of flexographic inks. It introduces the role of the proofer in simulating production conditions and explains how to prepare samples by setting parameters such as pressure, speed, and anilox roll specifications.
Automatic coating machines are used for the uniform application of conductive silver paste onto ITO glass.
This article explores the technique of uniformly coating conductive silver paste on ITO glass using an automatic coating machine. By controlling parameters such as coating speed and pressure, the automatic coating machine replaces traditional manual methods, thereby enhancing the consistency and repeatability of the coating process.
Sealing tester measures the pressure resistance and leakage of composite film bags.
This article introduces how to use a seal tester to evaluate the pressure resistance and leakage performance of composite film bags. The test primarily involves applying controlled pressure inside the packaging and observing pressure changes or leakage to assess the quality of the seal.
Positive pressure method seal tester evaluates packaging pressure resistance
This article introduces how the positive pressure method sealing tester evaluates the pressure resistance of packaging. The instrument simulates actual pressure conditions by injecting compressed air into the packaging and then monitors pressure changes to determine if there is any leakage.
Negative pressure method leak detector for testing vacuum packaging seal integrity
The negative pressure leak detector evaluates the seal integrity of vacuum packaging by simulating a pressure differential environment. The instrument places the sample in a testing chamber and creates a vacuum to form negative pressure. If there is a leak, air or liquid will seep into the packaging, and the result is determined by observing pressure changes or the presence of bubbles.
Melt flow index tester measures the processing fluidity of high-temperature engineering plastics.
This article introduces how a melt flow indexer measures the processing fluidity of high-temperature engineering plastics. It first explains the working principle of the instrument, which involves measuring the rate at which molten plastic passes through a standard die under specific temperature and pressure conditions to obtain the melt flow rate value.
Sealing Tester Measures Leak Points in Flexible Packaging Bags.
This article introduces how a seal tester detects air leak points in flexible packaging bags. It primarily identifies leaks through changes in pressure or vacuum, and the operation involves preparing samples, setting parameters, and conducting standardized testing.
Mechanical thickness gauge for measuring film thickness uniformity.
The mechanical thickness gauge assesses the uniformity of film thickness through contact measurement. During measurement, the probe contacts the sample under standard pressure, converting displacement into a thickness reading.
Heat Sealing Tester Determines the Optimal Heat Sealing Temperature for Films
A heat seal tester is used to determine the optimal heat sealing temperature of films to ensure the sealing strength and integrity of packaging. During testing, by setting a temperature gradient and fixing parameters such as pressure and time, samples are heat-sealed at different temperatures, and then their strength is measured.
Key Parameters for Air Compressor Selection and Analysis of Energy Efficiency Standards
The selection of an air compressor requires comprehensive consideration of discharge pressure, discharge volume, drive power, and the characteristics of the compressed medium to meet actual air usage requirements.
Vacuum adsorption coating table solves the problem of film substrate wrinkling.
The vacuum adsorption coating platform uses a microporous array connected to a vacuum system beneath the tabletop to create a pressure difference, tightly adsorbing the film substrate. This ensures it remains flat during the coating process, preventing wrinkles that could lead to uneven coating.
The melt flow indexer measures the flow rate of thermoplastic resins.
A melt flow indexer is a device used to measure the flowability of thermoplastic resins. It calculates the melt flow rate by determining the mass or volume of the melt that passes through a standard die within 10 minutes under specific temperature and pressure conditions.
How to Utilize a Vacuum Adsorption Coating Machine to Solve the Slippage Issue During Coating on Flexible PET Substrates
The vacuum adsorption coating machine stabilizes the flexible PET substrate on the coating platform through negative pressure, effectively addressing the slipping issue during the coating process. Slipping is primarily caused by factors such as the smooth surface of PET, insufficient friction, and interference from coating pressure, which can lead to uneven coatings.
Application of Paperboard Burst Strength Tester in Packaging Materials
The paperboard bursting strength tester is a detection device used to measure the ability of packaging materials such as paperboard to resist rupture under vertical pressure. During the test, the sample is clamped between annular clamps, and increasing pressure is applied via hydraulic or pneumatic means until rupture occurs. The maximum pressure value is recorded as the bursting strength.