Adopt scraping method, equipped with 1 Meter Oven and UV light curing system, curing area 600 * 500mm, main peak wavelength 365nm, pRoduction speed 0-5m/min, with tension control unwinding to ensure uniform and stable Spreader.
LED Cold Illuminant Technology, No Infrared Radiation, Suitable for Heat Sensitive Materials; Power density 400-2400mw/cm ², curing area 500x400mm.
PRoduction speed 0-5m/min, effective application width ≤ 300mm, using scraping with UV light curing, drying tunnel length of 1 Meter, with tension control unwinding and Touchscreen operation.
Using 395nm wavelength LED Illuminant, Light intensity 0-100% adjustable, equipped with Water-Cooled system to ensure stable operation, support 10-50mm irradiation distance, maximum conveying speed of 6 m/min, suitable for fine curing process.
Using 395nm wavelength LED Illuminant, Optical Power up to 12W/cm ², equipped with Water-Cooled system to ensure stable operation, adjustable irradiation distance of 10-50mm, support 0-100% stepless dimming, suitable for a variety of material curing needs.
Effective application width up to 500mm, UV curing length 1000mm, using Touchscreen control, support 0-5m/min pRoduction speed, with tension control unwinding and adjustable UV UV light intensity 1-30mw/cm ² to ensure uniform curing.
Application width up to 400mm, pRoduction speed 0-5m/min adjustable, UV light curing area 400 * 1000mm, main peak wavelength 365nm, equipped with tension control unwinding and Touchscreen Operating interface to achieve stable Spreader and rapid curing.
Using 405nm wavelength and 0.8W/cm ² optical power density, UVLED output is concentrated, the photoelectric conversion rate is high, and the curing speed is fast; the cold light source has low heat radiation, avoids thermal stress deformation, and is suitable for thermal materials.
Using dual Illuminant UV LED multi-directional irradiation, the transparent inlay was completed quickly in 60 seconds, the working capacity reached 20 samples, and the inlay Hardness after curing was 84~ 86 Shore D.
It adopts 2kw mercury lamp and 365nm band to realize instant curing, the transmission speed is adjustable from 1-5m/min, the irradiation distance is adjustable from 100-300mm, and it is suitable for different workpiece sizes.
The equipment adopts reticulated roller painting technology, Spreader thickness range 0.005-3mm, equipped with 1 Meter Air-Cooled curing box and feeding trough heating function, the temperature can reach 200 ℃, to achieve accurate Spreader control and stable composite effect.
With lame plating and scraping dual functions, coating speed 0-5m/min adjustable, equipped with UV light curing system, curing area 300 * 1000mm, support automatic tension control and deviation correction function.
Spreader speed 0-5m/min, effective application width 300mm, support UV curing and cutting function, Servo Control system to ensure High Accuracy operation.
Water-Cooled cooling system, LED UV Illuminant with 395 nm wavelength and 700 W Power, Light intensity 0-100% adjustable, conveying speed 0-6 m/min adjustable, suitable for rapid curing of various UV materials.
Using a 395nm wavelength UVLED light source, the optical power density reaches 0.8W/cm ², the cold light source is designed with low thermal radiation to avoid workpiece deformation, supports digital dimming and automatic manual control mode, and has safety door protection and data recording functions.
