Impact energy 11mJ, ball head Hardness up to 1600HV, can measure the minimum thickness of 5mm specimen, suitable for asperity 1.6μm surface, Che diaMeter minimum 0.35mm, to meet the needs of precision hardness testing.
Impact energy 11mJ, Ball Hardness 1600HV, contact surface slender lengthened design, suitable for measurement of grooves or concave surfaces, the minimum thickness of the specimen is 5mm, and the minimum depth of the hardened layer is 0.8mm.
1000 +/- 5g dead weight and 500 +/- 5g payload combined pressure, equipped with 20 times reading Microscope to achieve 0.1mm accuracy measurement, can quantify the anti-indentation performance of coatings and support plastic deformation analysis.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
Test accuracy is ensured by using 500g payload and carbide circular tool, built-in horizontal bubble, and 20 times Microscope can accurately measure the size of the Crowd, with a reading accuracy of 0.1mm.
Impact energy 11mJ, ball head diaMeter 3mm, suitable for measurement of slender narrow grooves or holes, the average surface asperity of the specimen is 1.6μm, and the minimum depth of the hardened layer is 0.8mm.
High Accuracy Position Sensor, indentation accuracy of 0.01mm, the maximum can be measured 1.25mm thick plate, automatic zero after the test without cumulative error, with 10 times magnifying glass for easy observation.
Impact energy 11mJ, ball head diaMeter 3mm tungsten carbide material, can measure a variety of metal hardness of materials, Che diaMeter minimum 0.35mm, suitable for conventional Hardness testing needs.
Impact energy 11mJ, ball head diaMeter 3mm tungsten carbide material, can measure the maximum Hardness 940HV, suitable for asperity 1.6μm surface, minimum test thickness 5mm, Che diaMeter and depth vary with Hardness.
Impact energy 11mJ, Impact mass 7.8g, tungsten carbide ball head Hardness 1600HV, suitable for asperity 1.6μm surface, measurable minimum thickness 0.8mm hardened layer, indication Repeatability 12HLD + 15.
Impact energy 11mJ, ball head diaMeter 3mm tungsten carbide material, can measure the thickness of more than 5mm workpiece, suitable for assembly line inspection once completed, Che diaMeter of 0.35mm minimum damage to the workpiece.
Adopting the principle of rolling timing of the ball by inclined columnar measurement tube, the viscosity range 0.5-1000 00mPa · s, Temperature range -20 ℃ to 120 ℃, Repeatability is better than 0.5%, and the sample sealing measurement has no external interference.
Equipped with 3mm tungsten carbide ball head, Impact energy 11mJ, can measure the minimum thickness of 5mm workpiece, specially designed for complex structures such as slender narrow grooves and Holes.
Impact energy 11mN, Impact device mass 80g, suitable for measurement of slender narrow groove, can meet the needs of different shapes and sizes of workpiece Hardness detection.
Impact energy up to 90Num, Impact device mass 250g, can measure surface roughness up to 30μm large heavy specimen, ball head using tungsten carbide material Hardness up to 1600HV.
