Touchscreen operation, intuitive display, with frequency setting, digital display and automatic stop function, the liquid storage cylinder can adjust the dripping speed according to the national standard requirements, suitable for performance evaluation of various film composite treatment surfaces.
Flow rate of scruf liquid can be precisely controlled by using double brush to accelerate the simulated abrasion scraping experiment, and various consumables such as brush, scruf pad and sponge can be compared and tested.
Controlled by single chip microcomputer, temperature accuracy +/- 0.03 ℃, kinematic viscosity measurement range 0.5~ 20000mm ²/s, automatic tracking of heating Linear dispersion and precise control of water Bath and oil Bath temperature.
Adopt automatic mechanical pressurization and curing inlay program, Heating power 650W, mold sleeve specification is 40mm, realize automatic heating and pressurization and automatic pressure relief after molding, real-time temperature display to ensure stability and reliability.
Adopt automatic mechanical pressurization and heating technology, mold sleeve specification is 30mm, Heating power 650W, automatic pressing and shutdown pressure relief, real-time temperature display, support room temperature sampling, suitable for thermoset material inlay.
Using high-resolution digital camera for automatic detection and playback function, can simultaneously measure three capillary tubing, temperature control using platinum resistance to improve accuracy, with automatic and manual visual two measurement modes.
Using photoelectric automatic equilibrating principle, measurement range +/- 45 ° optical rotation and +/- 120 ° Z sugar content, minimum reading +/- 0.001 °, equipped with color LCD Touchscreen and USB interface, support automatic retest 6 times and calculate the average value.
Using photoelectric detection and automatic dial display, the measurement range is +/- 45 °, the minimum reading is 0.001 °, and the low optical rotation sample can be accurately analyzed, and the operation is simple.
The kit can realize automatic grinding fineness Gauge operation, improve test Repeatability, suitable for standard scraper fineness Meter supporting use, simplify the experimental process.
Using ARM microprocessor and color liquid crystal display, with automatic heating sweep ignition function, Temperature range 40~ 400 ℃, can store 1000 measurement results, support atmospheric pressure correction and forced Air-Cooled.
Using automatic mechanical pressurization and heating technology, the inlay process is completed automatically, the Heating power is 650W, and the mold sleeve specification is 25mm, which is suitable for edge protection of small irregular samples.
Adopt ARM microprocessor and color LCD display, with automatic heating, sweeping, ignition function, Repeatability ≤ 110 ℃ +/- 1 ℃, support atmospheric pressure correction and forced Air-Cooled, easy and reliable operation.
Spreader thickness range 1~ 571.5μm, accuracy +/- 0.001mm, speed 5~ 200mm/s, with automatic feeding and stirring function, can customize a variety of coating methods.
Measurement range 0-200mN/m, accuracy +/- 0.02mN/m, support Automatic calibration and temperature compensation, real-time display test Linear dispersion and export Excel data.
Measurement range 0~ 14.00pH and accuracy +/- 0.01pH, built-in automatic polarity reversal circuit, automatic tracking end point potential, no need to manually switch, easy to operate and precise control.
