The device adopts D-type Impact device, supports 360 ° measurement, can display a variety of Hardness standards, has 600 sets of Data storage capacity, is small in size and weighs only 0.2kg, and has a standby time of 100 hours. It is suitable for small spaces and field environments.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
Impact energy 11mJ, ball head diaMeter 3mm tungsten carbide material, can measure a variety of metal hardness of materials, Che diaMeter minimum 0.35mm, suitable for conventional Hardness testing needs.
Impact energy 11mJ, Ball Hardness 1600HV, contact surface slender lengthened design, suitable for measurement of grooves or concave surfaces, the minimum thickness of the specimen is 5mm, and the minimum depth of the hardened layer is 0.8mm.
Impact energy 90mJ, ball head diaMeter 5mm tungsten carbide material, suitable for heavy and rough surface casting and forging, the maximum hardness of the specimen 650HB, the minimum thickness of 10mm, hardening layer depth ≥ 1.2mm.
Impact energy 11mJ, ball head diaMeter 3mm tungsten carbide material, can measure the maximum Hardness 940HV, suitable for asperity 1.6μm surface, minimum test thickness 5mm, Che diaMeter and depth vary with Hardness.
Impact energy 11Num, Impact device mass 50g, suitable for measurement of grooves or concave surfaces, is an optional Impact device from Leeb Hardness Tester.
Impact energy 11N, Impact device mass 75g, suitable for general-purpose part measurement, can be measured with a minimum thickness of 3mm, and a minimum diaMeter of 0.35mm.
With three Adjustments, it can simultaneously measure Richter, Brinell, Rockwell and other Hardness values, indication Repeatability 6HLD, support 360 ° measurement direction, standard D-type Impact device and optional Miscellaneous type, anti-vibration Impact electromagnetic interference.
Impact energy 11mJ, ball head diaMeter 3mm tungsten carbide material, can measure the thickness of more than 5mm workpiece, suitable for assembly line inspection once completed, Che diaMeter of 0.35mm minimum damage to the workpiece.
High Accuracy D-type Impact device, Measurement range of 170~ 960HLD, built-in thermal printer to achieve on-site data printing, can store 600 sets of measurement data, support 7 kinds of Impact device automatic identification.
Impact energy 11mJ, ball head diaMeter 3mm, suitable for measurement of slender narrow grooves or holes, the average surface asperity of the specimen is 1.6μm, and the minimum depth of the hardened layer is 0.8mm.
Impact energy up to 90mJ, can detect materials with a maximum Hardness of 650HB, designed for large and heavy castings, can adapt to workpieces with a surface roughness of 6.3μm, and a minimum test thickness of 10mm.
The C-type Impact device has a small impact force and is suitable for surface hardening and thin-walled component testing; dual coil technology ensures +/- 6HL typical accuracy; built-in directional Sensor automatically compensates for errors; supports 5 Hardness standard conversions.
Impact energy 11mJ, Impact mass 7.8g, tungsten carbide ball head Hardness 1600HV, suitable for asperity 1.6μm surface, measurable minimum thickness 0.8mm hardened layer, indication Repeatability 12HLD + 15.
