Adjustable scraper Spreader mode, Spreader accuracy of +/- 0.02mm, equipped with air-cooled water-cooled double chill down system, Spreader rate of 5-25m/min, Heating Temperature range to 200 ℃ +/- 3 ℃.
Water-Cooled cooling system, LED UV Illuminant with 395 nm wavelength and 700 W Power, Light intensity 0-100% adjustable, conveying speed 0-6 m/min adjustable, suitable for rapid curing of various UV materials.
Using 395nm wavelength LED Illuminant, Optical Power up to 12W/cm ², equipped with Water-Cooled system to ensure stable operation, adjustable irradiation distance of 10-50mm, support 0-100% stepless dimming, suitable for a variety of material curing needs.
The Water-Cooled cooling system is adopted to ensure stable operation. The 395nm wavelength LED Illuminant provides uniform illumination. The light Power reaches 12W/cm ² and the illumination distance is 30-50mm. It has over-temperature protection and Power 0-100% adjustment function.
The hydraulic pump provides 150bar pressure to tighten the sample; the double-ended die sleeve can be operated independently of any specification; the hot and cold separation design ensures safety and stability; the water chilling down system accelerates the sample preparation speed.
The hydraulic pump provides 16Mpa pressure to ensure the sample is tight, and the water chilling down system is equipped to speed up the sample preparation. The unique swirl/spin lock design simplifies the operation, and the program control realizes the heating to 180 ° C and the adjustable holding time, and the performance is stable and reliable.
The hydraulic pump provides a pressure of 50 to 200 bar to ensure that the sample is tight, and the cavity can be lengthened to inlay two samples at the same time. The unique hot and cold separation design ensures safety, and the double sample inlay can be completed in as little as 7 minutes.
Temperature range -40~ 130 ℃, Temperature Fluctuation ≤ +/- 0.5 ℃, using imported Air-Cooled fully enclosed refrigeration Compressor, with grounding protection, over-temperature protection, refrigerator overpressure overload protection and other functions.
The integrated Air-Cooled design does not require a cold water tower, has 2700W refrigeration power and 24m pump head, supports dual pump dual temperature control and multiple protection functions, and can be remotely monitored through a variety of Communication interfaces.
The equipment adopts reticulated roller painting technology, Spreader thickness range 0.005-3mm, equipped with 1 Meter Air-Cooled curing box and feeding trough heating function, the temperature can reach 200 ℃, to achieve accurate Spreader control and stable composite effect.
Temperature range -60~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, equipped with wind and water-cooled dual-stage Compressor and multiple protection devices to ensure test Stability and safety.
Adopt immersion coating method, mechanical speed 1.2m/min adjustable, Temperature range 50-150 ℃ +/- 3 ℃, equipped with Air-Cooled system and air knife cutting, support automatic tension control, ensure coiling edge uniformity +/- 3.0mm.
Temperature range -5~ 95 ℃, using Air-Cooled fully enclosed Compressor, high cooling efficiency and low noise, the whole Tank foamed insulation, the inner Tank is made of stainless steel, PID automatic temperature control accuracy.
Temperature range -20~ 95 ℃, Tank size 350 * 350 * 220mm. Using continuous PID automatic control and Air-Cooled fully enclosed Compressor, cooling fast and low noise, the inner Tank is made of stainless steel, good thermal insulation performance.
Temperature range -20~ 150 ℃, studio volume 1000L, Temperature Uniformity +/- 1.0 ℃, using wind, water-cooled dual-stage Compressor and high temperature insulation material, support high temperature and low temperature Reliability test.
