Made of PUR material, compatible with drag chain design, suitable for a variety of right angle Probe models, providing stable signal transmission, suitable for coating thickness detection applications in industrial environments.
Temperature range -25 ℃, temperature control accuracy +/- 1 ℃, can simulate the natural low temperature environment for bending test, observe material changes, determine the degree of cold resistance.
The independent control structure of the cold and hot box is adopted, with a temperature conversion time of less than 15 seconds and a temperature recovery time of less than 5 minutes. It is equipped with multiple safety interlock protection and standard lead hole design to ensure efficient and safe testing.
Adopt independent control structure of hot and cold box, temperature conversion time ≤ 15 seconds, temperature recovery ≤ 5 minutes, equipped with safety interlock protection and 7-inch Touchscreen controller, support long-term adjustable test.
LED cold Illuminant life of more than 100,000 hours, built-in Paltier Temperature range 15 ℃ -45 ℃, Measurement range +/- 89 ° optical rotation, support Automatic calibration and a variety of Measurement modes.
With the independent control structure of the cold and hot box, the temperature conversion takes only 15 seconds and the recovery time does not exceed 5 minutes. The temperature fluctuation in the sample area is controlled within +/- 0.5 ° C, the load-bearing capacity is up to 40kg, and it is equipped with safety interlock protection and 7-inch Touchscreen controller.
Using LED cold Illuminant life of more than 100,000 hours, built-in Paltier temperature control to improve accuracy, Measurement range of +/- 89 °, support optical rotation, specific rotation, concentration and sugar measurement, fully automated operation.
Adopt -80 ℃ cold trap temperature and ≤ 5Pa Vacuum Level, support sample pre-freezing and freeze-drying of various containers, with one-button defrosting, data export and vacuum alarm functions, easy operation and easy maintenance.
The use of professional gas diversion technology has good water capture effect, and the cold trap temperature reaches -80 ° C to capture 4kg of water. Support sample pre-freezing and lyophilization of various containers, with data export and remote control functions, built-in maintenance reminders and vacuum alarm systems.
Adopt cold Illuminant narrow-band interference Optical inspection system, Optical inspection stability is less than 0.002A/20min, support room temperature to 180 ℃ stepless temperature control, anti-chlorine interference up to 2000mg/L, batch processing of 20 water samples, easy to operate without changing pipes.
Adopting stainless steel frame, suitable for dry, wet and manual screening, with a aperture of 150 μm, laser engraved labels ensure clear traceability and meet ISO standards.
Optical inspection system using imported cold Illuminant and narrow band interference, Optical inspection stability is less than 0.002A/20min, digestion temperature accuracy +/- 0.5 ℃, support COD and ammonia nitrogen dual paraMeter measurement, can save multiple standard Linear dispersion and data.
Adopt -80 ° C cold trap temperature and 4kg/batch water, equipped with pre-freezing function without additional equipment, color Touchscreen display paraMeters, support for a variety of container freeze-drying and automatic maintenance reminders.
Adopt -80 ° C cold trap temperature and ≤ 5Pa Vacuum Level, with sample pre-freezing function and color Touchscreen operation, support data export and remote control, built-in maintenance reminders and one-click defrosting.
Danfoss Compressor to achieve -60 ℃ low temperature, water capture up to 4kg/batch. With cold trap pre-freezing function without additional equipment, color Touchscreen display operating paraMeters, support data export and remote control.
