Temperature range RT + 10~ 300 ℃, Temperature Uniformity +/- 1 ℃, using stainless steel liner and forced circulation system, with automatic ventilation function, ventilation 8~ 20 times/hour adjustable, suitable for material aging test.
Adopt stainless steel liner and hot air circulation system, Temperature Uniformity +/- 2 ℃, ventilation time 3min-100h adjustable, equipped with low speed turntable and multiple safety protection devices.
Adopt high temperature and low noise motor and multi-leaf centrifugal wind turbine, Temperature Uniformity +/- 2 ℃, equipped with low speed turntable and hot air circulation system to ensure stable and uniform temperature in the working room.
The use of high temperature fan and special air duct to achieve uniform heating, equipped with low-speed turntable to ensure uniform heating of the sample, Temperature Fluctuation control within +/- 0.5 ℃, ventilation can be adjusted within the range of 3-100 times/hour.
The equipment adopts high-density fiberglass cotton insulation layer Film thickness 150mm, Temperature Uniformity up to +/- 1 ℃, with automatic ventilation system adjustable ventilation volume 8-20 times/hour, sample holder can be swirl/spin design to enhance test uniformity.
Temperature range RT + 10~ 300 ℃, Temperature Uniformity +/- 1 ℃, with automatic ventilation system can adjust the ventilation volume 8~ 20 times/hour, sample holder can swirl/spin to ensure test uniformity.
Adopt high temperature and low noise motor and multi-leaf centrifugal wind turbine, Temperature Uniformity +/- 2 ℃, equipped with low speed turntable, support 3~ 100 times/h ventilation volume adjustment, to meet a variety of aging test needs.
300W yellowing resistant bulb provides 365-400nm wavelength ultraviolet, Temperature Uniformity +/- 1 ℃, can simulate the atmospheric environment accelerated testing, one machine multi-purpose support aging Oven function.
Adopt two-box mobile structure, air pressure drive test object Impact, Thermal Shock mechanism moving time within 10 seconds, temperature recovery time within 5 minutes, in line with MIL and other international test standards.
Temperature range RT + 10~ 300 ℃, Temperature Uniformity +/- 1 ℃, stainless steel swivel and automatic ventilation system, support sample swirl/spin and independent heating control, suitable for material heat resistance testing.
Adopt stainless steel shaft impeller forced convection cycle, Temperature Uniformity +/- 1 ℃, adjustable ventilation rate 8-20 times/hour, with independent ventilation system and sample holder swirl/spin function.
Equipped with forced hot air circulation system to ensure uniform temperature distribution, temperature control accuracy of +/- 0.3 ℃, support 0-999 hours timing and nine-point fault warning function, using PID automatic calculation to reduce manual setting inconvenience.
The three-box structure is used to achieve static test, the temperature conversion time is ≤ 10 seconds, the temperature recovery is ≤ 5 minutes, the air passage switching mode intRoduces the temperature, and the temperature control accuracy is +/- 0.5 ℃, which is suitable for material thermal expansion and contraction testing.
Temperature range RT + 10~ 300 ℃, Temperature Uniformity +/- 1 ℃, stainless steel liner and automatic ventilation system, support sample holder swirl/spin and forced ventilation functions, suitable for material heat resistance testing.
Adopt high temperature fan and special air duct to ensure temperature uniformity, equipped with low speed turntable; Temperature range RT + 10~ 200 ℃, uniformity +/- 2 ℃, support 3-100 times/h ventilation volume adjustment.
