The hydraulic pump provides 16Mpa pressure to ensure the sample is tight, and the water chilling down system is equipped to speed up the sample preparation. The unique swirl/spin lock design simplifies the operation, and the program control realizes the heating to 180 ° C and the adjustable holding time, and the performance is stable and reliable.
Bar and drawdown blade double coating method, coating speed 1-300mm/s stepless speed regulation, meyer Rod coating accuracy +/- 0.001mm, clamshell drawdown blade design is easy to clean, Touchscreen control operation is simple.
Using meyer Rod coating accuracy of +/- 0.001mm and Blade Coating accuracy of +/- 0.003mm, clamshell Drawdown blade for easy cleaning, Spreader speed 1~ 300mm/s stepless speed, support a variety of substrate material coating.
The extrusion process ensures accurate 16 micron wet film thickness, the stainless steel is durable and provides 300 mm application width for efficient sample preparation.
Using automatic mechanical pressurization and heating technology, the inlay process is completed automatically, the Heating power is 650W, and the mold sleeve specification is 25mm, which is suitable for edge protection of small irregular samples.
Adjustable application width, with automatic Spreader function, easy to operate, Repeatability is good, suitable for a variety of samples of laboratory prepative.
Double disc design supports independent operation of grinding and polishing, stepless speed range of 20~ 120rpm, pneumatic pressurization and magnetic quick disc change structure, equipped with automatic locking and water outlet functions, can simultaneously clamp 6 samples to achieve efficient automatic sample preparation.
Only 5-18ml sample volume is required to complete the test, the sample cartridge is easy to clean and load, and the 316L material measuringflask can be customized for easy observation and detailed analysis of fluid characteristics.
Double disc design can be operated by two people at the same time, Rotation speed 50-1000rpm stepless adjustable, support forward and reverse rotation and chill down functions, adapt to different grinding and polishing needs, and improve sample preparation efficiency.
Rotation speed 100-1000rpm stepless adjustment, using pneumatic pressure and magnetic quick disk change design, improve sample efficiency and mass.
The adapter only needs 10-20mL sample volume, equipped with 21, 27, 28, 29 rotors, easy to disassemble and clean, can be connected to Thermostatic Bath to achieve temperature control, expand the viscosity measurement range.
The hydraulic pump provides 150bar pressure to tighten the sample; the double-ended die sleeve can be operated independently of any specification; the hot and cold separation design ensures safety and stability; the water chilling down system accelerates the sample preparation speed.
Using the principle of planetary motion, the grinding time is only 15-20 minutes, and the discharge particle size is up to 0.1 micron; it supports dry grinding, wet grinding, vacuum grinding and other methods, equipped with four-station design, Rotation speed 800rpm, suitable for various sample characteristics.
Heating power is 440W, the temperature is precisely controlled by digital temperature controller, easy to operate, suitable for thermosetting material inlay, and improve the preparation efficiency of the sample.
Adopt automatic mechanical pressurization and curing inlay program, Heating power 650W, mold sleeve specification is 40mm, realize automatic heating and pressurization and automatic pressure relief after molding, real-time temperature display to ensure stability and reliability.
