Equipped with double spray guns to achieve uniform lame plating, the lifting range of the spray gun is adjustable from 10-500mm, the integrated air filtrate adjustment system supports magnetic or vacuum panel fixing, and improves the coating test Repeatability.
Fully pneumatic design ensures stable operation, adjustable spray gun settings for precise atomization and film thickness control, and magnetic panel supports multiple substrate tests.
Adopt stainless steel liner and superfine Glass cotton insulation, equipped with multi-layer conductive film observation window and silicone rubber sealing. Temperature control accuracy +/- 0.5 ℃, humidity fluctuation +/- 2% RH, with independent over-temperature protection and interlocking safety device.
Temperature range from -40 to 150 ° C, Temperature Uniformity ≤ +/- 2.0 ° C, with up-supply air return air circulation system and environmentally friendly refrigerant, equipped with multi-layer conductive film observation window and multiple electrical protection mechanisms.
Temperature range -60~ 150 ℃, studio volume 250L, using the upper air supply and lower air return mode and multi-layer conductive film tempered hollow Glass observation window, with perfect electrical protection system and independent over-temperature protection device.
With -50~ 700 ℃ wide range and +/- 2% accuracy, laser positioning ensures accurate measurement of the target, 12:1 object distance ratio supports long-distance detection, 500ms fast Response real-time data.
The use of high temperature fan and special air duct to achieve uniform heating, equipped with low-speed turntable to ensure uniform heating of the sample, Temperature Fluctuation control within +/- 0.5 ℃, ventilation can be adjusted within the range of 3-100 times/hour.
Adopt high temperature and low noise motor and multi-leaf centrifugal wind turbine, Temperature Uniformity +/- 2 ℃, equipped with low speed turntable and hot air circulation system to ensure stable and uniform temperature in the working room.
Adopt high temperature fan and special air duct to ensure temperature uniformity, equipped with low speed turntable; Temperature range RT + 10~ 200 ℃, uniformity +/- 2 ℃, support 3-100 times/h ventilation volume adjustment.
Adopt high temperature and low noise motor and multi-leaf centrifugal wind turbine, Temperature Uniformity +/- 2 ℃, equipped with low speed turntable, support 3~ 100 times/h ventilation volume adjustment, to meet a variety of aging test needs.
Mechanical and electrical separation structure design, easy maintenance, with automatic intelligent feed function, according to the hardness of materials automatically adjust Rotation speed, to avoid stagnation, the maximum cutting cross-section up to Φ 90mm, after cutting the sample surface flat without burns.
Rated temperature 60 ℃ accuracy +/- 1 ℃, can observe the melting state at a distance, directly paste the use without complicated operation, suitable for a variety of electrical equipment temperature monitoring.
Precision up to +/- 1 ° C error, can observe the melting state at a distance, visually display temperature changes, suitable for temperature monitoring of various electrical equipment connection parts.
4.0Mm diaMeter nickel-chromium wire ring, Temperature range 500~ 1000 ℃ adjustable, apply 0.8~ 1.2N force and limit the pressing depth of 7mm, automatic timing of ignition and extinguishing time, Thermocouple 1050 ℃ high temperature resistance.
The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted without complex installation and is suitable for temperature monitoring of a variety of electrical equipment.
