Magnetic surface temperature measurement Probe through strong magnetic adsorption on the workpiece, small volume and light mass, Sensor and magnet insulation to ensure measurement accuracy, the highest temperature 480 ℃, especially suitable for circular workpiece surface.
Built-in Probe design, surface temperature Measurement range -40~ 80 ℃, air temperature accuracy +/- 0.5 ℃, Humidity range 0~ 100% RH, providing stable and reliable dew point monitoring.
The ring 6mm Probe design ensures good contact with the workpiece surface, the Teflon jacket is easy to clean and flexible and durable, the maximum temperature resistance is 300 ° C, and the lightweight shape avoids affecting the measurement accuracy.
Using 5MHZ Frequency and 10mm diaMeter Probe design, Measurement range 1.2-230 mm, the minimum pipe diaMeter can be measured Φ 20mm × 3mm, suitable for thickness detection in room temperature environment.
The open contact design ensures that the Probe is in good contact with the surface, and the Teflon wire combines flexibility and easy cleaning characteristics to withstand high temperatures up to 300 ° C, and the lightweight shape avoids temperature interference.
With IP67 waterproof and dustproof housing, it supports external Probe measurement in the range of -40 to 125 ° C, and can store up to 16,000 readings in a single channel, with high and low temperature alarm LED indicators.
Equipped with folding penetrating stainless steel Probe, NTC Thermistor Sensor for accurate measurement, temperature range -50~ 300 ℃, Protection Rating IP67, suitable for semi-solid and frozen material temperature detection.
Application width 300mm, Spreader accuracy +/- 0.005mm, Drawdown blade can be quickly disassembled and cleaned, three independent temperature control oven to ensure uniform drying, suitable for a variety of substrates and Stock processing.
With IP67 waterproof rating, it can be dustproof and waterproof. Built-in Probe temperature measurement range is -20.0 to 60.0 ° C, with accuracy +/- 0.2 ° C. Supports single channel up to 16,000 reading storage, and is equipped with high and low alarm LED prompts.
Using penetrating AISI 316 stainless steel Probe, temperature range -50.0~ 220 ℃, accuracy +/- 0.2 ℃, with boot Self-check function, easy to clean and suitable for semi-solid and frozen materials.
Measurement range of -40.0~ 125.0 ℃ and accuracy of +/- 0.2 ℃ with external stainless steel Probe. With IP67 waterproof housing, it supports high and low alarms and Data storage of up to 16000 readings, and the recording interval is adjustable.
Built-in Air Temperature Humidity Sensor and K-Connector, with armored cable and magnetic surface temperature sensor to prevent accidental detachment, supports a variety of optional Probe conversions.
Using NTC Thermistor Sensor, temperature accuracy +/- 0.2 ° C (-30.0~ 170.0 ° C), equipped with folding stainless steel Probe can penetrate semi-solid materials, with IP67 Protection Rating and a variety of automatic shutdown modes.
Temperature range -50 to 300 ° C, Response Time of only 4 seconds, equipped with replaceable ultra-fast Response stainless steel penetration Probe, with CAL Check ™ Adjustment and battery error prevention system to ensure accurate and reliable measurement.
Using NTC Thermistor Sensor, Temperature measurement accuracy +/- 0.2 ℃, equipped with 103mm penetrating stainless steel Probe, supports a variety of automatic shutdown settings, Protection Rating up to IP67.
