Equipped with needle Probe for direct insertion measurement, the range covers -50 to 300 ° C, the accuracy reaches +/- 1 ° C, Repeatability +/- 1% or +/- 1 ° C, and it is small and lightweight only 60g.
Foldable stainless steel probe design, temperature range -49.9~ 49.9 ℃, Accuracy up to +/- 0.5 ℃, equipped with large LCD display and Fahrenheit switching function, easy to high temperature liquid safety measurement.
Dual Probe design can measure two samples at the same time, equipped with BEPS low power error prevention system to avoid wrong readings, Measurement accuracy of +/- 0.5 ℃, support K/J/T type multiple temperature sensors, waterproof design to adapt to complex environments.
Using penetrating AISI 316 stainless steel Probe, temperature range -50.0~ 220 ℃, accuracy +/- 0.2 ℃, with boot Self-check function, easy to clean and suitable for semi-solid and frozen materials.
Using NTC Thermistor Sensor, temperature accuracy +/- 0.2 ° C (-30.0~ 170.0 ° C), equipped with folding stainless steel Probe can penetrate semi-solid materials, with IP67 Protection Rating and a variety of automatic shutdown modes.
Using NTC Thermistor Sensor, Temperature measurement accuracy +/- 0.2 ℃, equipped with 103mm penetrating stainless steel Probe, supports a variety of automatic shutdown settings, Protection Rating up to IP67.
With dual measurement interfaces to detect two samples simultaneously, support a wide range of Probe types covering -200 ° C to 1371 ° C, equipped with Adjustment and backlit display to ensure measurement accuracy and ease of operation.
With penetrating AISI 316 stainless steel Probe, easy to clean and insert semi-solid pRoducts. With CAL Check ™ boot self-check function, temperature accuracy of +/- 0.2 ℃, Measurement range covering -50.0~ 220 ℃.
Measurement range from -50.0 to 300 ° C with Response Time of only 20 seconds. Equipped with a replaceable T-type stainless steel penetrating Probe, it meets IP65 waterproof standards and has built-in calibrate inspection and battery error prevention for measurement Stability and durability.
Equipped with fixed K-type stainless steel penetration Probe, Response Time 20 seconds, IP65 waterproof standard, with CAL Check ™ calibrate inspection and battery error prevention system to ensure accurate and reliable measurement.
With CAL Check ™ boot Self-check function, temperature measurement accuracy of +/- 0.2 ℃, using penetrating AISI 316 stainless steel Probe, IP65 waterproof, suitable for semi-solid and frozen material temperature measurement.
With split Probe design, equipped with F and N Probe, Measurement range 0~ 1500 microns, resolution 0.1 microns, automatic identification of substrate type, support for more than 60 readings per minute, Protection Rating IP65.
Response Time of only 4 seconds, temperature range of -50.0 to 300 ℃, equipped with replaceable ultra-fast Response K stainless steel penetration Probe, with CAL Check ™ calibrate inspection and automatic shutdown function.
Using 16-bit AD converter and K-type Thermocouple, sampling speed 16 times per second, Measurement range -50 ° C to 1300 ° C, support Fahrenheit switching and data retention functions.
Waterproof design ensures safe use in humid environment, supports three Thermocouple Probe types, Measurement accuracy up to +/- 0.5 ℃, dual measurement interface can connect two Probes at the same time, equipped with data locking and temperature Unit switching function.
