The stator diaMeter is 8mm, the maximum processing viscosity is 500CP, and the maximum linear speed is 8 m2/s. It is suitable for 10~ 60ml Sample Handling and is suitable for HR-6B/10B type homogenizer.
The stator diaMeter is 10mm, the maximum processing viscosity is 2000CP, and the maximum linear speed is 10 m2/s. It is suitable for HR-6B/10B type homogenizer, and the standard Processing capacity is 30-150ml.
Measurement range 0-1mm, Graduation 0.001mm, using Dial reading, probe diaMeter Φ 5mm plane, pressure 22kPa +/- 5kPa, simple and reliable structure, suitable for laboratory and field determination.
Measurement range 0-1mm, Graduation 0.001mm, probe diaMeter 5mm plane design, portable handheld for rapid measurement in the workshop, in line with industry standards.
Measurement range 0-12.7 mm, Graduation up to 0.001mm, using flat probe design to ensure accurate and reliable test data, suitable for all kinds of material thickness detection.
Glass sensitive film is used to fully sense the pH value of the liquid. Measurement range is 0~ 14pH, applicable temperature is 0~ 80 ℃.
The pat speed is 3~ 12 times/second, the pat spacing is 0~ 40mm, the homogeneity is soft and non-destructive, and there is no need to sterilize, which effectively prevents cross-contamination and protects the operator's safety.
Programmable setting of 3 to 12 times/second tap speed and 1 second to 100 minutes timing, adjustable tap spacing from 0 to 50mm, equipped with 4.3-inch touch screen and voice alarm function, effectively preventing cross-contamination.
The microcomputer control supports 8-stage programming, the pat speed is 3-12 times per second, and the time can be adjusted to 99 hours, 59 minutes and 59 seconds. The sample is handled without contact to avoid cross-contamination and no need to clean the utensils.
Programmable setting of 3 to 12 beats per second and 1 second to 100 minutes homogenization time, equipped with 4.3-inch touchscreen and voice alarm function, effectively separates microbial components in solid samples and prevents cross-contamination.
Stator diaMeter 6mm, maximum processing viscosity 100CP, maximum linear speed 5 m2/s, suitable for a variety of Sample Handling, providing stable and efficient homogenization performance.
Maximum processing viscosity up to 3000CP, suitable for HR500 and HR-25 series Homogenizer, providing stable Sample Handling capability to meet a variety of experimental needs.
Rotation speed 5000~ 30000rpm, Processing capacity 0.2~ 80mL, stainless steel working head corrosion resistance, large capacity battery supports outdoor mobile operation, suitable for a variety of cutter heads.
Standard Processing capacity 50~ 1500ml, maximum processing viscosity of 2000CP, suitable for a variety of Homogenizer models to meet different Sample Handling needs.
Processing capacity range of 50~ 1500ml, maximum processing viscosity of 3000CP, suitable for a variety of Homogenizer models, to meet the processing needs of different viscosity samples.
