The stator diaMeter is 8mm, the maximum processing viscosity is 500CP, and the maximum linear speed is 8 m2/s. It is suitable for 10~ 60ml Sample Handling and is suitable for HR-6B/10B type homogenizer.
The stator diaMeter is 10mm, the maximum processing viscosity is 2000CP, and the maximum linear speed is 10 m2/s. It is suitable for HR-6B/10B type homogenizer, and the standard Processing capacity is 30-150ml.
Special rotor-stator structure is adopted to achieve stepless speed regulation of 60-2800rpm, 720mm electric lift Travel, material withstands high-frequency shearing, and fine emulsification dispersion is completed in a short time.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
The pat speed is 3~ 12 times/second, the pat spacing is 0~ 40mm, the homogeneity is soft and non-destructive, and there is no need to sterilize, which effectively prevents cross-contamination and protects the operator's safety.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
Programmable setting of 3 to 12 times/second tap speed and 1 second to 100 minutes timing, adjustable tap spacing from 0 to 50mm, equipped with 4.3-inch touch screen and voice alarm function, effectively preventing cross-contamination.
The microcomputer control supports 8-stage programming, the pat speed is 3-12 times per second, and the time can be adjusted to 99 hours, 59 minutes and 59 seconds. The sample is handled without contact to avoid cross-contamination and no need to clean the utensils.
Programmable setting of 3 to 12 beats per second and 1 second to 100 minutes homogenization time, equipped with 4.3-inch touchscreen and voice alarm function, effectively separates microbial components in solid samples and prevents cross-contamination.
Stator diaMeter 6mm, maximum processing viscosity 100CP, maximum linear speed 5 m2/s, suitable for a variety of Sample Handling, providing stable and efficient homogenization performance.
Maximum processing viscosity up to 3000CP, suitable for HR500 and HR-25 series Homogenizer, providing stable Sample Handling capability to meet a variety of experimental needs.
Rotation speed 5000~ 30000rpm, Processing capacity 0.2~ 80mL, stainless steel working head corrosion resistance, large capacity battery supports outdoor mobile operation, suitable for a variety of cutter heads.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
Standard Processing capacity 50~ 1500ml, maximum processing viscosity of 2000CP, suitable for a variety of Homogenizer models to meet different Sample Handling needs.
Processing capacity range of 50~ 1500ml, maximum processing viscosity of 3000CP, suitable for a variety of Homogenizer models, to meet the processing needs of different viscosity samples.
