Multi-blade design is equipped with 6 cutter teeth, 1.5mm equal spacing arrangement, suitable for 50~ 125μm film thickness environment testing, to ensure cross-cutting accuracy in line with international standards.
Made of carbide steel, the number of teeth is 11, and the tooth spacing is 1mm to ensure accurate and even cross-cutting. The winger design improves cutting effect and durability.
The equipment adopts the immersion coating method, the effective application width is 500mm, the mechanical speed is adjustable 1.2m/min, and it is equipped with Air-Cooled system and cross-cutting device to ensure efficient and uniform coil processing.
Adopt gravity manual cutting method, the maximum cutting section is 85 * 85mm, equipped with bilateral fixture structure and closed cutting Chamber, built-in LED lighting and circulating chill down system to ensure the cutting mass and easy observation and operation.
Adopt gravity manual cutting method, the maximum cutting section is 85 * 85mm, equipped with bilateral fixture structure and closed cutting Chamber, built-in LED lighting and circulating chill down system to ensure the cutting mass.
Suitable for metallographic sample cutting, the maximum cutting cross section of 65 * 65mm, spindle Rotation speed 2800rpm, equipped with circulating chilling down system, the surface of the sample after cutting is bright and flat without burns, easy to operate.
The number of teeth is 11, the spacing is 1mm, and the single-sided simple cutter head design can be used for cross-cutting experiments. Standard two cutter heads are provided for easy operation.
Made of stainless steel, 6-tooth design, 2mm spacing, ISO/DIN 2409 standard, suitable for soft substrate film thickness testing to ensure cutting accuracy and durability.
Mechanical and electrical separation structure design, easy maintenance, with automatic intelligent feed function, according to the hardness of materials automatically adjust Rotation speed, to avoid stagnation, the maximum cutting cross-section up to Φ 90mm, after cutting the sample surface flat without burns.
Vacuum hardened stainless steel material, cutting depth can be accurately adjusted, weight only 352g easy to carry, suitable for different film thickness and substrate adhesion testing.
Maximum cutting section of 100 * 100mm, equipped with bilateral fixture and circulating chilling down system, the surface of the sample after cutting is bright and flat without burns, easy maintenance.
The weight load constant cutting force is used for automatic cutting, and the cutting is automatically stopped after completion. MicroMeter device can adjust the thickness of the sample cutting to achieve precision cutting. Spindle Rotation speed is adjustable from 50 to 800rpm, equipped with a chill down system to avoid sample burns, and the surface is bright and flat after cutting.
Three-axis linkage automatic precision control, intelligent cutting can change the amount of feed according to the hardness of materials, the maximum cutting section is 100 × 100mm, equipped with mobile magnetic filtrate circulating water Tank and fully enclosed safety structure.
Using three-axis automatic precision control, the maximum cutting section of 200 * 150mm, with intelligent cutting function can change the amount of feed according to the hardness of materials, fully enclosed structure to ensure safe operation, mobile magnetic filtrate circulating water Tank to improve the cutting mass.
Equipped with 11 teeth 1mm pitch stainless steel cutter head, suitable for 0-50μm film thickness test, adjustable cutter head angle, with nylon brush and 2.5x magnifying glass, to meet a variety of standard requirements.
