Test corona pen

The corona test pen works by applying liquid through its tip onto the surface of a material and observing whether the liquid spreads or contracts to evaluate the effectiveness of corona treatment. The principle is based on changes in surface tension, used to detect the hydrophilicity of materials such as plastic films, ensuring adhesion for printing or coating. It is applied for rapid on-site testing on packaging and film production lines.
Selection
When selecting a corona test pens, it is essential to match the material type and surface energy range, ensuring that the surface tension value of the pen fluid covers the corona level of the material to be tested. Attention should be paid to the stability and volatility of the pen fluid, and the pen tip material should allow for uniform application. Choose the corresponding specifications according to industry standards such as ASTM to ensure that the test results align with actual process requirements.

Terms

Standards

Instruments

Plastic film surface tension can be accurately tested, support a variety of material testing, available in pen and 10ml to 500ml bottle specifications, optional red, blue and custom Color.

$ 87.00

Test results do not need to wait, a wipe is available; full sealing pen design, long life and environmental protection; compact and portable, easy to disassemble and install; accurate test, fine workmanship.

$ 89.00

Using a hard fiber axe pen, the writing width is 7mm, and the test results do not need to wait for a wipe. The fully sealed pen cover design ensures environmental protection and long shelf life, making it portable and practical.

$ 89.00

The test results are fast without waiting, the full sealing pen cover has a long environmental protection life, is small in size and easy to carry, can accurately test the surface tension Dyne Level, and the writing width is 7mm and the capacity is 7ml.

$ 89.00

The test results are fast and do not need to wait, the full sealing pen cover has a long environmental protection life, the volume is small and easy to carry, the test is accurate and the workmanship is fine, and the writing width is 7mm and the capacity is 7ml.

$ 89.00

The 7mm writing width test is accurate, the full sealing pen cover design ensures a long service life and is not contaminated, and the Portable structure is convenient for quick detection of surface tension on site.

$ 89.00

The test results are fast without waiting, the full sealing pen cover has a long environmental protection life, is small in size and easy to carry, can accurately test the surface tension, and the writing width is 7mm and the capacity is 7ml.

$ 89.00

Test results are fast, a wipe is available; full sealing pen design, long life and environmental protection; compact and portable, easy to disassemble and install; accurate test, can accurately determine the surface tension Dyne Level.

$ 89.00

The test does not need to wait for a wipe to get the result, the full sealing pen cover ensures a long life without pollution, the 7mm writing width accurately detects the surface tension value, and the portable design is practical and convenient.

$ 89.00

Using hard fiber axe pen, writing width 7mm, capacity 7ml, full sealing design to ensure accurate testing and long shelf life, can quickly and intuitively detect the material surface tension state.

$ 89.00

The test results are fast without waiting, the full sealing pen cover has a long environmental protection life, is small in size and convenient to carry, can accurately test the surface tension value, and the writing width is 7mm and the capacity is 7ml.

$ 89.00

The test results are fast without waiting, the design life of the full sealing pen cover is long, and the 7ml capacity writing width is 7mm, which can accurately test the surface tension value of the material.

$ 89.00

The test results are fast without waiting, the design life of the full sealing pen cover is long and the shelf life is long, the 7mm writing width can accurately test the surface tension value, and the Portable structure is easy to disassemble and install.

$ 89.00

The test results are fast without waiting, the full sealing pen cover ensures environmental protection and long life, the test Precision is high, the writing width is 7mm, and the capacity is 7ml, which is easy to carry and use.

$ 89.00

The test results are fast without waiting, the full sealing pen cover has a long environmental protection life, is small in size and easy to carry, can accurately test the surface force Dyne Level, and the writing width is 7mm and the capacity is 7ml.

$ 89.00

Articles

The use of gravure proofing machines in the comprehensive evaluation of gravure ink printability and drying performance.
This article explores how a gravure proofing press can be used to comprehensively evaluate the printability and drying properties of gravure inks. The experiment tested the dot sharpness, transfer rate, and leveling properties of different inks using standard equipment, while recording drying times through the filter paper method and infrared temperature measurement.
The friction color fastness tester measures the amount of color transfer under dry and wet abrasion conditions for ink.
This article introduces a method for testing the amount of ink color transfer using a friction colorfastness tester, simulating both dry and wet rubbing conditions. Dry rubbing involves rubbing the ink surface with a dry white cotton cloth, while wet rubbing uses a white cotton cloth moistened with water.
Application of High-Temperature Viscometer in Testing the Melt Viscosity Characteristics of Hot Melt Ink
This article introduces a method for testing the melt viscosity of hot-melt ink using a high-temperature viscometer. The test employs a rotational viscometer to measure the viscosity of three ink samples at different temperatures.
Determination of Thermal Decomposition Temperature and Inorganic Filler Content in Ink by Thermogravimetric Analyzer
This article introduces how to determine the thermal decomposition temperature and inorganic filler content of ink using a thermogravimetric analyzer. During the test, a small amount of ink sample is heated in a nitrogen or air atmosphere, and the mass change curve is recorded.
Impact of the Fixture Design of a Drop Hammer Impact Tester on the Plastic Impact Strength Results
This article primarily discusses the impact of the fixture design of a drop-weight impact testing machine on the results of plastic impact strength tests. The geometric parameters of the fixture, clamping method, and contact surface material can alter the stress state and energy transfer of the specimen, thereby affecting the accuracy of the test data.
Application of High-Temperature Universal Testing Machine in the Study of Hot Modulus of Rupture of Refractory Materials
This article introduces the application of a high-temperature universal testing machine in measuring the hot modulus of rupture of refractory materials. It explains the working principle, testing procedure, and key parameters of the testing machine, such as the effects of heating rate, holding time, and loading rate.
Application of Tensile Testing Machine in 180-Degree Peel Strength Test for Packaging Tape
This article introduces how a tensile testing machine is used to test the 180-degree peel strength of packaging tape.
Application of High-Frequency Fatigue Testing Machine in Infinite Life Testing of Valve Springs
This article discusses the application of high-frequency fatigue testing machines in the infinite life testing of valve springs. The test simulates the long-term working stress of the spring through high-frequency cyclic loading, with parameters such as preload, amplitude, and cycle count set according to international standards.
Resistance Tester Selection: Measurement Methods for Low Resistance and High Resistance
This article introduces the selection method of resistance testers. Based on the range of the measured resistance, low resistance requires the four-wire Kelvin method, using constant current and voltage measurement to eliminate the influence of contact resistance; high resistance uses the voltage method to measure tiny currents, with attention to shielding and leakage prevention.
Transverse Burst Strength Tester for the Evaluation of Impact Resistance of Corrugated Cardboard
This article explains how a lateral bursting strength tester is used to evaluate the impact resistance of corrugated cardboard. It measures the energy absorbed by the cardboard at the point of rupture using the pendulum impact principle, requiring the preparation of specimens according to standards and the control of environmental conditions during testing.
Surface Absorbency Tester for Predicting Drying Speed of Printing Ink on Coated Paper
This article explores how the surface absorbency tester predicts the drying speed of ink on coated paper. Traditional methods rely on actual printing tests, which are time-consuming and difficult to quantify.
Extended Application of Paper Water Absorption Tester in the Dispersibility Evaluation of Tissue Paper
This article explores how to extend the application of an instrument originally used for testing the water absorption capacity of paper to evaluate the dispersibility of tissue paper.
Standard Procedure for Printability Tester in Evaluating Ink Transfer Performance
This article introduces the standard procedure for evaluating ink transfer performance using a printability tester. The transfer performance of ink directly affects print quality, and standardized operations can enhance the reliability of test results.
Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
Gelation Time Tester in the Testing of Thermosetting Resin Curing Process
The gel time tester is used to measure the transition time of thermosetting resins from a liquid state to a gel state, which is crucial for controlling the curing process and product quality.