Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
The independent control structure of the cold and hot box is adopted, with a temperature conversion time of less than 15 seconds and a temperature recovery time of less than 5 minutes. It is equipped with multiple safety interlock protection and standard lead hole design to ensure efficient and safe testing.
Impact height up to 120 cm, weight weight mass 1000g, no secondary rebound after impact, to ensure accurate and reliable test results, suitable for film impact performance evaluation.
Impact performance of paint film can be accurately determined by using 1000g standard weight and 100cm adjustable impact height, 8mm diaMeter of punch, which meets the standard test requirements and is easy and reliable to operate.
With the independent control structure of the cold and hot box, the temperature conversion takes only 15 seconds and the recovery time does not exceed 5 minutes. The temperature fluctuation in the sample area is controlled within +/- 0.5 ° C, the load-bearing capacity is up to 40kg, and it is equipped with safety interlock protection and 7-inch Touchscreen controller.
Impact height 40cm, drop weight mass 500g, the degree of damage to the paint film is assessed by steel ball Impact, and the digital grade shows the anti-Impact ability, which is suitable for standard testing.
Impact height 0-50cm can be accurately adjusted, drop weight mass 1000g with the Φ 8mm punch, can accurately determine the film anti-Impact performance, easy to operate and Repeatability.
Adopt independent control structure of hot and cold box, temperature conversion time ≤ 15 seconds, temperature recovery ≤ 5 minutes, equipped with safety interlock protection and 7-inch Touchscreen controller, support long-term adjustable test.
Impact block weight 500 +/- 5g, ball diaMeter φ 14 Hardness HRc60-66, can accurately assess the damage grade of paint film.
Impact height 0-100cm adjustable, equipped with 1000g drop weight and Φ 8mm punch, Impact depth 2mm, can accurately determine the material anti-Impact performance.
Impact height 0-50cm adjustable, equipped with 1000g drop weight and Φ 8mm punch, Impact depth 2mm, can accurately determine the material resistance to Impact performance.
Using 1kg weight free fall impact, impact height adjustable range 0-50cm, equipped with φ 8mm punch and φ 15mm die base, can carry out positive and negative impact test.
Impact height 0~ 50cm adjustable, drop weight mass 1000g, the structure is simple and easy to operate, punch diaMeter 8mm and die base aperture 15mm cooperate to prevent the edge of the test plate shear.
Impact height of 120 cm, Impact depth of 2.5 mm, using a fixed mass weight to avoid secondary rebound, to ensure accurate and reliable test results.
Using 2000g heavy hammer and 16mm punch, Impact depth 2.5mm, no secondary rebound phenomenon, to ensure accurate and reliable test results.
