Acceleration Measurement range 0.1~ 199.9m/s ², with automatic switching range and backlight display function, support AC signal output.
Acceleration Measurement range 0.1~ 199.9m/s ², Frequency range 10Hz~ 1KHz, with automatic switching range and backlight display function.
Equipped with piezoelectric acceleration Sensor, acceleration measurement range 0.1-400 m/s ², support bearing inspection special mode, provide USB/RS-232/Bluetooth multi-interface data output, with AC signal output function.
Frequency 159.2Hz, Acceleration output 14.14m/s ², Maximum load 150g, compact and portable, fast heating, low lateral output, suitable for rapid vibration detection system.
Impact height up to 120 cm, weight weight mass 1000g, no secondary rebound after impact, to ensure accurate and reliable test results, suitable for film impact performance evaluation.
Impact height 0-50cm adjustable, equipped with 1000g drop weight and Φ 8mm punch, Impact depth 2mm, can accurately determine the material resistance to Impact performance.
Impact height up to 120 cm, using 1000g standard hammer body, no secondary rebound phenomenon after impact, to ensure accurate and reliable test results.
Impact height 0-100cm adjustable, equipped with 1000g drop weight and Φ 8mm punch, Impact depth 2mm, can accurately determine the material anti-Impact performance.
Frequency 159.2Hz, Acceleration output 10m/s ², Support 150g load verification, Transverse output less than 5%, Heating time less than 3 seconds, Compact handheld design for fast detection.
Using 1kg weight free fall impact, impact height adjustable range 0-50cm, equipped with φ 8mm punch and φ 15mm die base, can carry out positive and negative impact test.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Impact method using drop ball, test height range of 50-1000mm, equipped with four radius Impact head and 300-1000g weight, can accurately evaluate the material anti-Impact performance and fracture.
Impact specimens with semi-spherical punches are used for energy consumption measurement to evaluate anti-Impact performance. Impact energy range is 3J, Impact speed is 2.5m/s, and it is suitable for a variety of film and paper tests.
Impact height range is adjustable from 0-100cm, equipped with 1000g drop weight and Φ 8mm punch, accurate impact testing is achieved through mechanical structure, and the operation is stable and reliable.
Impact energy 2.7mJ, Impact mass 3.0g, tungsten carbide ball head Hardness up to 1600HV, suitable for asperity 0.4um surface, providing accurate Hardness measurement.
