With 3000 times/min and 6000 times/min two vibration frequencies, the amplitude can be continuously adjusted between 0mm and 3mm, supporting three modes of subtle vibration, intermittent vibration and continuous vibration, suitable for ≤ 325 mesh material analysis.
Using Piezoelectric Vibration Sensor, can simultaneously measure Acceleration, Speed, Displacement three paraMeters, Acceleration Frequency range 10Hz~ 10KHz, with metric conversion and MAX Maximum hold function, support USB, RS-232 and Bluetooth data output.
The three-channel design can simultaneously display the same paraMeter of two measurement points or three paraMeters of a single point; the wide frequency range covers 10Hz~ 10kHz; it is equipped with a high-performance acceleroMeter to ensure measurement accuracy; it supports a variety of Data output methods for easy analysis and recording.
The three-box structure design is adopted, the test sample is still in the test area, the temperature recovery time is ≤ 5min, and the conversion time is ≤ 10s. It has three test functions of high temperature, low temperature and Thermal Shock, meeting a variety of standard requirements.
Frequency 159.2Hz, Acceleration output 14.14m/s ², Maximum load 150g, compact and portable, fast heating, low lateral output, suitable for rapid vibration detection system.
Simultaneous measurement of three-axis or single-axis vibration paraMeters, Frequency range up to 10Hz-10KHz, Support for Displacement, Speed and Acceleration Measurement modes, with AC signal output for auscultation recording.
Elliptical trajectory vertical vibration design, vibration Frequency 660 times/min, maximum load 30KG, equipped with automatic cooling down system to maintain sample temperature stability, closed structure to reduce noise and pollution risk.
Can simultaneously display three-direction vibration paraMeters, support Acceleration, Speed, Displacement measurement, Acceleration Frequency range of 10Hz~ 10kHz, with AC signal output and a variety of Interface, easy to field detection and data recording.
Horizontal Vibration Technology, Vibration Frequency 45-200Hz Adjustable, Throwing plate diaMeter 300mm, can handle multiple samples and automatically complete the polishing process.
Acceleration Meter to achieve three-dimensional vibration measurement, Frequency range 10Hz-10KHz, accuracy +/- 5% + 2 words, bearing condition measurement and automatic shutdown function, weight only 130 grams.
It can simultaneously measure three paraMeters of displacement, speed and Acceleration, Frequency range up to 10Hz-10KHz, with bearing condition detection and signal output functions, suitable for on-site mechanical vibration analysis.
Displacement, Speed and Acceleration paraMeters can be displayed at the same time. Frequency range is 10-10KHz. Piezoelectric Acceleration Sensor is used to ensure measurement accuracy and repeatability. Bearing condition measurement function is provided.
The three-box structure is used to realize the static test sample, the strong cooling hot air circuit switching technology, the temperature conversion time is less than or equal to 10 seconds, the temperature recovery time is less than or equal to 5 minutes, and the temperature control function is independent in the high temperature zone, the low temperature zone and the test zone.
Adopt equilibrating Conditioning Control system, with multi-stage intelligent output to ensure stable Humidity. Temperature range -60~ 150 ℃, Humidity Control Range 20~ 98% R.H., with energy saving function and comprehensive protection system to ensure long-term accurate operation.
With 5-10KHz broadband measurement capability, support bearing condition detection and vibration signal output, use piezoelectric Sensor to ensure Measuring accuracy +/- 5%, provide a variety of paraMeter Measurement range.
