Suitable for metallographic sample cutting, the maximum cutting cross section of 65 * 65mm, spindle Rotation speed 2800rpm, equipped with circulating chilling down system, the surface of the sample after cutting is bright and flat without burns, easy to operate.
Maximum cutting section of 100 * 100mm, equipped with bilateral fixture and circulating chilling down system, the surface of the sample after cutting is bright and flat without burns, easy maintenance.
Adopt automatic mechanical pressurization and curing inlay program, Heating power 650W, mold sleeve specification is 40mm, realize automatic heating and pressurization and automatic pressure relief after molding, real-time temperature display to ensure stability and reliability.
Rotation speed 100-1000rpm stepless adjustment, using pneumatic pressure and magnetic quick disk change design, improve sample efficiency and mass.
Double disc independent control can be operated by double person at the same time, the diaMeter of the throwing disc is 230mm, the Rotation speed is 900r/min, the transmission is stable and the noise is small, and the operation and maintenance are convenient.
Adopt automatic mechanical pressurization and heating technology, mold sleeve specification is 30mm, Heating power 650W, automatic pressing and shutdown pressure relief, real-time temperature display, support room temperature sampling, suitable for thermoset material inlay.
Discard diaMeter 230mm, Rotation speed 900r/min, transmission smooth low noise, easy operation and maintenance, suitable for a variety of material polishing needs.
Using automatic mechanical pressurization and heating technology, the inlay process is completed automatically, the Heating power is 650W, and the mold sleeve specification is 25mm, which is suitable for edge protection of small irregular samples.
The hydraulic pump provides 16Mpa pressure to ensure the sample is tight, and the water chilling down system is equipped to speed up the sample preparation. The unique swirl/spin lock design simplifies the operation, and the program control realizes the heating to 180 ° C and the adjustable holding time, and the performance is stable and reliable.
The hydraulic pump provides a pressure of 50 to 200 bar to ensure that the sample is tight, and the cavity can be lengthened to inlay two samples at the same time. The unique hot and cold separation design ensures safety, and the double sample inlay can be completed in as little as 7 minutes.
Using 2800rpm Rotation speed and 2.2kW Power, equipped with fast fixture and chill down system, can cut 50mm cut sample, easy operation and maintenance.
Disposal diaMeter 230mm, Rotation speed 900r/min, smooth transmission and low noise, easy operation and maintenance, suitable for a variety of material polishing requirements.
The specimen is fixed with a bilateral fixture structure, with a maximum cutting section of 100 × 120mm, a transparent observation window and a powerful exhaust device. After cutting, the surface of the specimen is bright and flat without burns.
Adopt gravity manual cutting method, the maximum cutting section is 85 * 85mm, equipped with bilateral fixture structure and closed cutting Chamber, built-in LED lighting and circulating chill down system to ensure the cutting mass and easy observation and operation.
Double disc independent operation, Rotation speed 50~ 1400r/min stepless speed regulation, throwing disc diaMeter 230mm, equipped with water supply system and drawer type sewage box, smooth transmission and low noise.
