Two-stage pump structure is equipped with PTFE material pump head, strong corrosion resistance, maximum Flow rate 125L/min, Ultimate vacuum degree 15-20mbar, no pollution and maintenance, low noise and low temperature rise.
Using PTFE pump head and diaphragm material, resistant to strong corrosive gases. Pumping speed 60L/min, Ultimate vacuum degree 3-8mbar, with pressure relief and cleaning functions, good air tightness, operating noise less than 58dB.
Using PTFE pump head material and coating diaphragm, suitable for strong corrosive gases, pumping speed 20L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, good air tightness and noise less than 58dB.
Using electromagnetic motor and diaphragm sealing Chamber, Vacuum Level up to 0.08Mpa, pumping rate 60L/min, non-oil pump design pollution-free, full Teflon material resistant to strong acid and alkali corrosion, free of daily maintenance.
Using PTFE pump head material and PTFE coating diaphragm, suitable for strong corrosive gases and steam, pumping speed up to 40L/min, Ultimate vacuum degree 3~ 8mbar, with pressure relief and cleaning functions, noise is less than 58dB.
PTFE material, strong corrosion resistance, Maximum Flow rate 20L/min, Ultimate vacuum degree 15~ 20mbar, no pollution maintenance, low noise stable operation.
Using PTFE pump head and composite diaphragm, strong corrosion resistance, maximum Flow rate 35L/min, Ultimate vacuum degree 15-20mbar, no pollution and maintenance, low noise operation stability.
PTFE material pump head and composite diaphragm, strong corrosion resistance, maximum Flow rate 35L/min, Ultimate vacuum degree 15-20mbar, no pollution and maintenance, low noise operation, suitable for corrosion environment.
PTFE material pump head and composite diaphragm, strong corrosion resistance, maximum Flow rate 65L/min, Ultimate vacuum degree 15-20mbar, oil-free design maintenance-free, low noise operation safe and stable.
PTFE material corrosion-resistant structure, pumping rate of 20L/min, two-stage pump design to ensure high Vacuum Level, oil-free dry operation maintenance-free, noise less than 55dB quiet operation.
PTFE material pump head structure can resist strong chemical corrosion, double-stage pump design to achieve 6-8mbar Ultimate vacuum degree, oil-free dry operation to ensure complete recovery of solvent, noise less than 55dB quiet and stable operation.
PTFE material pump head and composite diaphragm, Maximum Flow rate 20L/min, Ultimate vacuum degree 15-20mbar, with anti-corrosion, low noise, overheating protection function, suitable for corrosion environment.
Using circulating water as the working fluid, the maximum Vacuum Level is -0.098Mpa, the pumping rate is 80L/min, the special fluid muffler reduces the noise, the double tap design can be used alone or in combination, and the ABS engineering plastic shell is resistant to corrosion.
The pumping rate is up to 30L/min, the ultimate pressure exceeds 0.085Mpa, and the imported corrosion-resistant rubber diaphragm is used. The noise is less than 50 decibels, and it can operate continuously for 24 hours without lubrication and maintenance.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
