Single Piston Air Compressor

A single-piston air compressor uses a crank-connecting rod mechanism to drive the piston in a reciprocating motion. During the intake phase, the cylinder volume increases, creating a negative pressure that draws in air. During the compression phase, the volume decreases, raising the air pressure. It is used to generate compressed air power, providing an air source for laboratory pneumatic equipment, spraying devices, and instrument control systems.
Selection
Match the air compressor's discharge pressure to the pressure requirements of the gas-consuming equipment, and determine the displacement based on 1.2 to 1.5 times the total gas consumption. Air-cooled compressors are suitable for small laboratories, while water-cooled compressors are ideal for continuous operation environments. Consider the power supply conditions of the workplace when selecting the corresponding voltage and power. Cast iron cylinders are suitable for long-term operation, while aluminum alloy cylinders are convenient for mobile use.

Terms

Standards

Instruments

Adopt piston structure, running Power 550W, noise value 58dB, with pure oil-free design, output gas clean, air pressure adjustable range 5-8Bar, automatic start-stop protection, service life of more than 15,000 hours.

$ 606.00

Adopting oil-free piston compression technology, the exhaust pressure is 8 Bar, the exhaust volume is 1500L/min, and the noise is only 72dB. It is equipped with a 330L air storage Tank and an automatic pressure switch to ensure a stable air supply.

$ 2252.00

Adopting oil-free piston compression technology, Operating Pressure 8Bar, the exhaust volume reaches 350L/min, the noise is as low as 57 decibels, and it is equipped with a 50L air storage Tank and automatic pressure switch control to ensure a stable air supply.

$ 411.00

The working noise is as low as 52dB, the maximum pressure is 8bar, the exhaust volume is 310L/min, the oil-free lubrication piston system and Nano coating cylinder liner are used, the gas is clean and the life is long, and it has multiple automatic protection functions.

$ 1074.00

Adopting oil-free piston technology, the working noise is only 62dB, equipped with a 50L gas storage Tank, the pressure switch automatically controls start and stop, and supports 5-8Bar pressure range adjustment to ensure stable air supply.

$ 394.00

Adopting oil-free piston compression technology, Operating Pressure 8Bar, with an exhaust capacity of 175L/min, equipped with a 9L air storage Tank to ensure continuous and stable air supply, with a noise of only 55dB and quiet operation. It supports automatic start-stop control of pressure switches.

$ 291.00

With oil-free piston design, the exhaust pressure is 8 Bar, the exhaust volume is 300 L/min, and the noise is only 62 dB. It is equipped with a 50L gas storage Tank and automatic pressure switch control to ensure continuous and stable air supply.

$ 411.00

Using oil-free piston compression technology, Operating Pressure range 5-8Bar adjustable, equipped with 90L gas Tank to ensure stable air pressure, low operating noise to 65 dB, Power 2.4KW to achieve high efficiency and energy saving, with automatic pressure control and Safety protection functions.

$ 580.00

Adopting oil-free piston technology, the working noise is only 69 decibels, equipped with a 220L gas storage Tank to ensure stable air supply, the pressure switch automatically controls the start and stop between 5-8 Bar, and supports a large Flow rate output of 1000L/min.

$ 1348.00

Adopting oil-free piston compression technology, the exhaust pressure is 8 Bar, the exhaust volume is 525L/min, and it is equipped with a 100L gas storage Tank and automatic pressure control. The noise is as low as 60dB to ensure a stable air supply.

$ 661.00

Adopting oil-free piston compression technology, the working noise is only 59dB, equipped with a 100L gas storage Tank, the exhaust pressure is 8Bar, and the exhaust volume is up to 360L/min. The pressure switch can be customized to start and stop settings to ensure a stable air supply.

$ 603.00

Adopting oil-free piston technology, the exhaust volume reaches 700L/min, the air storage Tank volume is 180L, and the noise is only 60dB. The automatic pressure switch controls the start and stop, eliminating the need for lubrication and maintenance. The structure is compact and durable.

$ 1077.00

Adopt oil-free piston technology to avoid oil pollution, working noise is as low as 54 decibels, exhaust pressure is 8 Bar, and it has a 120 liters/minute Flow rate. Equipped with multiple protection devices such as 25 liters gas Tank and safety valve.

$ 314.00

Noise is as low as 52 dB during operation, oil-free lubrication piston system and Nano coating cylinder liner are used, and the exhaust volume reaches 236L/min. Automatic start-stop design reduces energy consumption, and supports Filter selection to improve gas cleanliness.

$ 1526.00

Adopt oil-free piston technology to avoid lubricating oil pollution, with a working noise of only 56dB and quiet operation. Equipped with a 50L gas storage Tank to ensure stable air supply, the pressure switch can be set to 5-8Bar automatic start and stop to meet the needs of continuous operation.

$ 444.00

Articles

Comparison of Single-Column and Dual-Column Tensile Testing Machines in Plastic Film Testing Selection
This article introduces the differences between single-column and dual-column tensile testing machines in plastic film testing.
Cost-performance analysis of single-channel versus multi-channel switching modules when selecting a laboratory ion meter.
This article compares the cost-effectiveness of single-channel and multi-channel switching modules for laboratory ion meters. Single-channel devices have lower purchase costs, but additional instruments are required for each additional detection parameter. Multi-channel units have higher initial investment, but when testing more than three parameters, the total cost over three years is lower and the sample throughput is greater.
Constant temperature bath selection: circulation method and temperature control range.
This article on thermostatic bath selection primarily analyzes two core factors: circulation mode and temperature control range. The circulation mode is divided into natural convection and forced circulation, where the former is suitable for simple static experiments, while the latter offers higher precision and is better suited for multiple samples or integration with external devices.
Ultrasonic Thickness Gauge Selection: Technical Considerations for Probe Configuration and Measurement Modes
This article primarily introduces the technical factors to consider when selecting an ultrasonic thickness gauge. In terms of probe configuration, the frequency affects both resolution and penetration depth, while crystal size determines adaptability to curvature and surface conditions. Dual-element probes offer a smaller dead zone compared to single-element probes, and delay-line probes are suitable for thin-wall and high-temperature applications.
Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
The Zahn cup is used for the daily inspection of the viscosity of electrophoretic paint bath solutions.
This article introduces the application of the Zahn cup in daily inspections of the viscosity of electrophoretic paint bath solutions. The viscosity of electrophoretic paint affects coating quality, making daily inspections crucial. The Zahn cup is simple to operate, cost-effective, and suitable for rapid on-site measurements.
Advantages of Barcol Hardness Tester in Rapid On-site Coating Hardness Testing
The Barcol hardness tester is a portable device suitable for rapid on-site measurement of coating hardness. It determines the hardness value by measuring the depth of penetration of the indenter, offering simple operation and test completion within seconds.
UV spectrophotometer for measuring residual monomers in polymer solutions.
This article introduces a method for determining residual monomers in polymer solutions using ultraviolet spectrophotometry. The principle relies on the characteristic absorption of monomers in the ultraviolet region, calculating their content based on the relationship between absorbance and concentration.
Gloss meter measures the surface brightness of packaging film.
This article introduces the principle and method of using a gloss meter to measure the surface glossiness of packaging films. The gloss meter quantifies the specular reflection capability of a surface in gloss units by measuring the ratio of reflected light from the sample to that from a standard plate.
Transmittance Meter Selection Guide: Principles for Matching Light Sources and Samples
This article introduces how to select the light source for a transmittance meter based on sample characteristics. The types of light sources include halogen tungsten lamps, LEDs, and lasers, which are suitable for wide-band, monochromatic, or high-precision measurements, respectively.
Key Parameters for Air Compressor Selection and Analysis of Energy Efficiency Standards
The selection of an air compressor requires comprehensive consideration of discharge pressure, discharge volume, drive power, and the characteristics of the compressed medium to meet actual air usage requirements.
Comparison of Rotational Viscometer and Capillary Rheometer in Testing the Flowability of Resin Processing
The rotational viscometer measures torque via rotor rotation, making it suitable for testing the static or low-shear fluidity of resins under low shear rates, with simple and quick operation. The capillary rheometer, on the other hand, forces samples through a capillary to simulate high-shear processing, providing flow data closer to actual production conditions, but it is more complex and time-consuming to operate.
Tap density tester evaluates the accumulation characteristics of sprayed powder.
This article introduces how to use a tap density tester to evaluate the packing characteristics of spray powders. The tap density tester simulates vibration to densely pack the powder and measures the mass per unit volume, thereby obtaining the tap density.
Stormer Viscometer for Determining Krebs Viscosity of Paints
This article introduces the method of measuring the Krebs viscosity value of colored paints using a Stormer viscometer. Viscosity is a key indicator that affects the application and storage of coatings. The Krebs unit (KU) quantifies viscosity based on the resistance encountered by a rotor as it rotates within the paint sample.
Cobb Absorbency Tester Evaluates Paper Water Absorption Capacity
The Cobb water absorption tester is used to measure the water absorption capacity of paper or cardboard by simulating the liquid contact process and calculating the mass of water absorbed per unit area to determine the Cobb value.