Dual-piston air Compressor

A dual-piston air compressor compresses air through the alternating action of two pistons, converting mechanical energy into pneumatic energy. It is used to provide a stable supply of compressed air, maintaining pneumatic pressure in spraying equipment, pneumatic tools, and laboratory instruments.
Selection
Select the matching exhaust capacity based on gas consumption, and choose the working pressure range according to the required pressure. Consider the space to select an appropriate size, and compare the energy consumption and noise levels of different models. Check the durability of materials and the convenience of maintenance.

Terms

Standards

Instruments

Adopt piston structure, running Power 550W, noise value 58dB, with pure oil-free design, output gas clean, air pressure adjustable range 5-8Bar, automatic start-stop protection, service life of more than 15,000 hours.

$ 606.00

Adopting oil-free piston compression technology, the exhaust pressure is 8 Bar, the exhaust volume is 1500L/min, and the noise is only 72dB. It is equipped with a 330L air storage Tank and an automatic pressure switch to ensure a stable air supply.

$ 2252.00

Adopting oil-free piston compression technology, Operating Pressure 8Bar, the exhaust volume reaches 350L/min, the noise is as low as 57 decibels, and it is equipped with a 50L air storage Tank and automatic pressure switch control to ensure a stable air supply.

$ 411.00

The working noise is as low as 52dB, the maximum pressure is 8bar, the exhaust volume is 310L/min, the oil-free lubrication piston system and Nano coating cylinder liner are used, the gas is clean and the life is long, and it has multiple automatic protection functions.

$ 1074.00

Adopting oil-free piston technology, the working noise is only 62dB, equipped with a 50L gas storage Tank, the pressure switch automatically controls start and stop, and supports 5-8Bar pressure range adjustment to ensure stable air supply.

$ 394.00

Adopting oil-free piston compression technology, Operating Pressure 8Bar, with an exhaust capacity of 175L/min, equipped with a 9L air storage Tank to ensure continuous and stable air supply, with a noise of only 55dB and quiet operation. It supports automatic start-stop control of pressure switches.

$ 291.00

With oil-free piston design, the exhaust pressure is 8 Bar, the exhaust volume is 300 L/min, and the noise is only 62 dB. It is equipped with a 50L gas storage Tank and automatic pressure switch control to ensure continuous and stable air supply.

$ 411.00

Using oil-free piston compression technology, Operating Pressure range 5-8Bar adjustable, equipped with 90L gas Tank to ensure stable air pressure, low operating noise to 65 dB, Power 2.4KW to achieve high efficiency and energy saving, with automatic pressure control and Safety protection functions.

$ 580.00

Adopting oil-free piston technology, the working noise is only 69 decibels, equipped with a 220L gas storage Tank to ensure stable air supply, the pressure switch automatically controls the start and stop between 5-8 Bar, and supports a large Flow rate output of 1000L/min.

$ 1348.00

Adopting oil-free piston compression technology, the exhaust pressure is 8 Bar, the exhaust volume is 525L/min, and it is equipped with a 100L gas storage Tank and automatic pressure control. The noise is as low as 60dB to ensure a stable air supply.

$ 661.00

Adopting oil-free piston compression technology, the working noise is only 59dB, equipped with a 100L gas storage Tank, the exhaust pressure is 8Bar, and the exhaust volume is up to 360L/min. The pressure switch can be customized to start and stop settings to ensure a stable air supply.

$ 603.00

Adopting oil-free piston technology, the exhaust volume reaches 700L/min, the air storage Tank volume is 180L, and the noise is only 60dB. The automatic pressure switch controls the start and stop, eliminating the need for lubrication and maintenance. The structure is compact and durable.

$ 1077.00

Adopt oil-free piston technology to avoid oil pollution, working noise is as low as 54 decibels, exhaust pressure is 8 Bar, and it has a 120 liters/minute Flow rate. Equipped with multiple protection devices such as 25 liters gas Tank and safety valve.

$ 314.00

Noise is as low as 52 dB during operation, oil-free lubrication piston system and Nano coating cylinder liner are used, and the exhaust volume reaches 236L/min. Automatic start-stop design reduces energy consumption, and supports Filter selection to improve gas cleanliness.

$ 1526.00

Adopt oil-free piston technology to avoid lubricating oil pollution, with a working noise of only 56dB and quiet operation. Equipped with a 50L gas storage Tank to ensure stable air supply, the pressure switch can be set to 5-8Bar automatic start and stop to meet the needs of continuous operation.

$ 444.00

Articles

Comparison of Single-Column and Dual-Column Tensile Testing Machines in Plastic Film Testing Selection
This article introduces the differences between single-column and dual-column tensile testing machines in plastic film testing.
Ultrasonic Thickness Gauge Selection: Technical Considerations for Probe Configuration and Measurement Modes
This article primarily introduces the technical factors to consider when selecting an ultrasonic thickness gauge. In terms of probe configuration, the frequency affects both resolution and penetration depth, while crystal size determines adaptability to curvature and surface conditions. Dual-element probes offer a smaller dead zone compared to single-element probes, and delay-line probes are suitable for thin-wall and high-temperature applications.
Key Parameters for Air Compressor Selection and Analysis of Energy Efficiency Standards
The selection of an air compressor requires comprehensive consideration of discharge pressure, discharge volume, drive power, and the characteristics of the compressed medium to meet actual air usage requirements.
Cupping test instrument detects the cracking resistance of coatings under deformation.
This article introduces how the cupping test instrument detects the cracking resistance of coatings under deformation. It uses a spherical punch to uniformly press against the back of the sample, causing the coating to bulge with the substrate, simulating biaxial stretching until the coating cracks. The indentation depth at this point is recorded as the key indicator.
Automatic potentiometric titration method for determining hydrogen peroxide concentration by redox method
This article introduces a method for determining the concentration of hydrogen peroxide using an automatic potentiometric titrator. It is based on the redox reaction between potassium permanganate and hydrogen peroxide under acidic conditions, with the titration endpoint automatically determined by the abrupt change in potential.
Application of Two-Step Method with Pre-Coating and Fine-Coating in Eliminating Bubble Defects for Dual-Blade Coater
The dual-blade coater employs a two-step method of pre-coating and precision coating to eliminate bubble defects during the coating process. In the pre-coating stage, high shear force is applied to break the bubbles in the slurry, causing them to rupture and rise to the surface. The precision coating stage then precisely controls the coating thickness, removing any remaining bubbles to form a uniform wet film.
Differences between single-beam and double-beam structures in paper stiffness testers
Paper stiffness testers come in both single-beam and double-beam structures. The choice should be based on testing standards, sample thickness, and precision requirements.
Comparison of Dual-Principle Instruments: Magnetic Induction vs. Eddy Current for Coating Thickness Measurement
This article compares the principles of two coating thickness gauges. The choice of method depends on the substrate material: magnetic induction is used for magnetic metals, while eddy current is applied for non-magnetic metals.
Cupping tester evaluates the ductility of coatings.
The cupping tester is a detection device used to evaluate the ductility of coatings under biaxial tension. During the test, the punch presses the sample into the die until the first continuous crack appears in the coating, at which point the penetration depth of the punch is recorded as the cupping depth.
How does a roll-to-roll coating machine achieve double-sided coating?
How does a roll-to-roll coating machine achieve double-sided coating? Double-sided coating is a process that simultaneously or sequentially applies functional coatings to both sides of a flexible substrate (such as film, paper, or metal foil).
Difference between dual-beam and array spectrophotometers
This article aims to systematically elucidate the core differences between double-beam and array-type spectrophotometers in terms of working principles, optical structures, performance characteristics, and applicable scenarios, providing clear technical references for professionals in related fields.
Pendulum Hardness Determination: Comparison of Applicability between Double Pendulum Method and Compound Pendulum Method
This article compares two pendulum methods for measuring coating hardness. The choice of method should consider material hardness and testing conditions, and both methods require standardized calibration and sample preparation.
When selecting a drop testing machine, whether to choose a single-arm or double-arm configuration depends on the size and weight of the packaging.
When selecting a drop tester, the choice between a single-arm or double-arm model mainly depends on the size and weight of the packaging. For small, lightweight, and regularly shaped items, a single-arm tester is sufficient. However, for larger, heavier, or irregularly shaped items, it is better to choose a double-arm tester, as it offers greater stability and ensures more accurate test results.